Revision History

© 2022 Clinical Data Interchange Standards Consortium, Inc. All rights reserved. 

1 Introduction

This document describes the CDISC implementation of the Columbia-Suicide Severity Rating Scale Baseline Version 1/14/2009 (C-SSRS BASELINE) instrument.

CDISC does not modify questionnaires, ratings, and scales (QRS) instruments to meet Clinical Data Acquisition Standards Harmonization (CDASH) case report form (CRF) standards.

The representation of data collected for this instrument is based on the Study Data Tabulation Model Implementation Guide (SDTMIG) Questionnaires (QS) domain model, which can be found on the CDISC website at: https://www.cdisc.org/standards/foundational/sdtmig.

These specific implementation details for this instrument are meant to be used in conjunction with the SDTMIG. All CDISC QRS documentation packages can be found on the CDISC website at: https://www.cdisc.org/standards/foundational/qrs.

The CDISC Intellectual Property Policy can be found on the CDISC website at: https://www.cdisc.org/about/bylaws.

1.1 Representations and Warranties, Limitations of Liability, and Disclaimers

This document is a supplement to the SDTMIG for Human Clinical Trials and is covered under Appendix F of that document, which describes representations, warranties, limitations of liability, and disclaimers. Please see Appendix F of the SDTMIG for a complete version of this material.

CDISC specifies how to structure the data that has been collected in a database, not what should be collected or how to conduct clinical assessments or protocols. CDISC disclaims any liability for your use of this material.

Although the United States Food and Drug Administration (US FDA) has provided input with regard to this supplement, this input does not constitute US FDA endorsement of any particular instrument.  

2 Copyright Status

The Research Foundation for Mental Hygiene, Inc. owns the copyright for the C-SSRS BASELINE instrument and has granted CDISC permission to include this supplement in the CDISC inventory of QRS data standards supplements. Hence, CDISC developed QSTESTCD and QSTEST for each item based on the actual text on the instrument.

The CDISC documentation of this instrument consists of: (1) controlled terminology, (2) standard database structure with examples, and (3) CRF(s) annotated with the CDISC SDTMIG variables with submission values. 

Note: CDISC Controlled Terminology is maintained by National Cancer Institute (NCI) Enterprise Vocabulary Services (EVS). The most recent version should be accessed through the CDISC website at: https://www.cdisc.org/standards/terminology/controlled-terminology.

CDISC has developed this documentation at no cost to the copyright holder or any additional cost to users of the instrument beyond the normal license fees charged by the copyright holder.

CDISC acknowledges The Research Foundation for Mental Hygiene, Inc. for the approval to include the C-SSRS BASELINE in the CDISC data standards.

Reference for the C-SSRS BASELINE:

• (C-SSRS) Baseline 1/14/2009 (Posner, K.; Brent, D.; Lucas, C.; Gould, M.; Stanley, B.; Brown, G.; Fisher, P.; Zelazny, J.; Burke, A.; Oquendo, M.; Mann, J.; copyright 2008 The Research Foundation for Mental Hygiene, Inc.) 
• No part of the C-SSRS BASELINE Version 1/14/2009 may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of The Research Foundation for Mental Hygiene, Inc. and payment of any applicable fees. Copyright 2008 The Research Foundation for Mental Hygiene, Inc. All rights reserved.

3 The QS Domain Model

3.1 Assumptions for the QS Domain Model

All assumptions and business rules described in the SDTMIG QS domain are applicable to this supplement. Additional assumptions specific to the C-SSRS BASELINE are listed below.

The C-SSRS BASELINE is a suicidal ideation rating scale. It's a standard questionnaire administered on a CRF that is typically used in clinical trials to identify subjects at risk for suicidal ideation and behavior. 

1. The questionnaire is divided into 3 sections namely Suicidal Ideation, Intensity of Ideation and Suicidal Behavior.
   1. The first section, "SUICIDAL IDEATION", contains 5 items.
      1. QSTESTCD = "CSS0101" - "CSS0105" with QSORRES = "Yes" or "No" and QSSTRESC = "Y" or "N".
         1. If QSORRES = "Yes", then descriptions provided for QSTESTCD = "CSS0101A" - "CSS0105A" are represented in QSORRES and QSSTRESC. QSSTRESN is null for these items.
   2. The second section "INTENSITY OF IDEATION" contains 6 items.
      1. QSTESTCD = "CSS0106" is rating the most severe ideation with responses represented with a numeric score (1-5) in QSORRES, QSSTRESC, and QSSTRESN.
         1. "Description of Ideation" (QSTESTCD = "CSS0106A") is collected as free text. For this section of the C-SSRS BASELINE, QSORRES and QSSTRESC are represented with the text description. QSSTRESN is null for this item.
      2. For QSTESTCD = "CSS0107" - "CSS0108", the scale points include a numeric rating (1-5) and a definition of what is represented by the rating (e.g., 1 = "Less than once a week"). QSORRES is populated with the text description while the numeric rating is represented in the standardized character and numeric result variables QSSTRESC and QSSTRESN.  
      3. For QSTESTCD = "CSS0109" - "CSS0111", the scale points include a numeric rating (0-5) and a definition of what is represented by the rating (e.g., 0 = "Does not attempt to control thoughts"). QSORRES is populated with the text description while the numeric rating is represented in the standardized character and numeric result variables QSSTRESC and QSSTRESN.
   3. The third section is "SUICIDAL BEHAVIOR".
      1. QSTESTCD = "CSS0112", "CSS0114", "CSS0115", "CSS0117", and "CSS0119" with QSORRES = "Yes" or "No" and QSSTRESC = "Y" or "N". QSSTRESN is null.
         1. If QSORRES = "Yes", then descriptions provided for QSTESTCD = "CSS0113A", "CSS0116A", "CSS0118A", and "CSS0119A" are represented in QSORRES and QSSTRESC. QSSTRESN is null for these items.
      2. For QSTESTCD = "CSS0120" QSORRES = "Yes" or "No" and QSSTRESC = "Y" or "N". QSSTRESN is null for these items.
      3. A "Total # of Attempts" (QSTESTCD = "CSS0113"), "Total # of interrupted" (QSTESTCD = "CSS0116") and "Total # of aborted" (QSTESTCD = "CSS0118") is represented in QSORRES, QSSTRESC, and QSSTRESN.
      4. The section "Answer for Actual Attempts Only" contains the following:
         1. "Most Recent Attempt Date" (CSS0121A), "Most Lethal Attempt Date" (QSTESTCD = "CSS0122A"), and "Initial/First Attempt Date" (CSS0123A) are represented in QSORRES and QSSTRESC and should be in ISO 8601 format.
         2. "Actual Lethality/Medical Damage" for "Most Recent Attempt", "Most Lethal Attempt" and "Initial/First Attempt" (QSTESTCD = "CSS0121B", "CSS0122B", and "CSS0123B") and "Potential Lethality" (QSTESTCD = "CSS0121C", "CSS0122C", and "CSS0123C") are represented with a numeric score (either "0-5" or "0-2", respectively) and descriptive text. For this section of the C-SSRS BASELINE, QSORRES is populated with the text description while the numeric rating is represented in the standardized character and numeric result variables QSSTRESC and QSSTRESN.
2. The C-SSRS BASELINE instrument is evaluated for multiple time points. The time period of evaluation for the C-SSRS BASELINE is populated as an evaluation interval in ISO 8601 format in QSEVLINT when the interval can be precisely described as a duration, or as a text value in QSEVINTX when it cannot be precisely described as an ISO 8601 duration. The evaluation interval for the C-SSRS BASELINE is populated in the QSEVINTX field as an evaluation interval text value, since it cannot be precisely described as an ISO 8601 duration. The evaluation interval for the C-SSRS BASELINE is "LIFETIME" (QSEVINTX = "LIFETIME").
3. Items are divided into 3 subcategories represented in QSSCAT: "SUICIDAL IDEATION", "INTENSITY OF IDEATION" and "SUICIDAL BEHAVIOR".
4. Some items on the C-SSRS BASELINE may be not done due to conditional branching. Items determined for conditional branching in the C-SSRS BASELINE are as follows:
   1. If QSTESTCD = "CSS0101" and "CSS0102" have QSORRES = "No", then the logic branches to QSTESTCD = "CSS0112" and QSTESTCD = "CSS0103" - "CSS010111" will not be done.
   2. If QSTESTCD = "CSS0101" has QSORRES ="Yes" and QSTESTCD = "CSS0102" has QSORRES = "No", then the logic branches to QSTESTCD = "CSS0106" and QSTESTCD = "CSS0103" - "CSS0105A" will not be done.
   3. Items QSTESTCD = "CSS0101A" - "CSS0105A" are only completed when the response to the preceding items (QSTESTCD = "CSS0101" - "CSS0105") is "Yes"; otherwise they are not done.
   4. If QSTESTCD = "CSS0112" has QSORRES = "No", then the logic branches to QSTESTCD = "CSS0114" and QSTESTCD = "CSS0113", "CSS0113A", "CSS0121A", "CSS0121B", "CSS0121C", "CSS0122A", "CSS0122B", "CSS0122C", and "CSS0123A", "CSS0123B", "CSS0123C", will not be done.
   5. If QSTESTCD = "CSS0115" has QSORRES = "No", then the logic branches to QSTESTCD = "CSS0117" and QSTESTCD = "CSS0116" and "CSS0116A" will not be done.
   6. If QSTESTCD = "CSS0117" has QSORRES =  "No", then the logic branches to QSTESTCD = "CSS0119" and QSTESTCD = "CSS0118" and "CSS0118A" will not be done.
   7. If QSTESTCD = "CSS0119" has QSORRES =  "No", then the logic branches to QSTESTCD = "CSS0120" and QSTESTCD = "CSS0119A" will not be done.
   8. If QSTESTCD = "CSS0121B", "CSS0122B", and "CSS0123B" have QSSTRESC = "1", "2", "3", "4", or "5", then QSTESTCD = "CSS0121C", "CSS0122C", and "CSS0123C" will not be done.

5. A derived record is created and a QS supplemental qualifier variable is used to indicate an item was conditionally branched. When an item is not done due to conditional branching, it is represented as follows:

   1. QNAM = “QSCBRFL”, QLABEL = “Conditional Branched Item Indicator “, QVAL = “Y”. (This is a QS supplemental qualifier variable.)      

   2. QSSTAT = "NOT DONE", and QSREASND is missing

   3. QSORRES, QSSTRESC and QSSTRESN are set to null (missing)
6. Records are created in qs.xpt for every item on the sponsor's version of the instrument.
   1. For items not done due to conditional branching, refer to assumptions 4 and 5.
   2. In the unexpected situation where the reason is unknown, then QSORRES, QSSTRESC and QSSTRESN are all missing, QSSTAT = "NOT DONE", and QSREASND is missing.

7. Some responses to the C-SSRS BASELINE items exceeded the 200-character limit for the QSORRES variable and needed to be reduced to fewer than 200 characters. Section 4, SDTM Mapping Strategy, indicates which item responses were revised in order to fit the 200-character limit. 

8. Terminology

   1. QSCAT, QSTESTCD, and QSTEST values are included in CDISC Controlled Terminology.

   2. A full list of value sets for the qualifier, timing, and result fields is provided in Section 4, SDTM Mapping Strategy.

3.2 Example for the C-SSRS BASELINE QS Domain Model

The C-SSRS BASELINE example below shows the terminology used to implement the instrument in the QS domain. This example shows the data for 1 subject collected at baseline (v1) and another subject at baseline (v1) and visit 2 for the C-SSRS BASELINE instrument. The example uses CDISC Controlled Terminology for QSTESTCD, QSTEST, and QSCAT. All original results, matching the CRF item response text, are represented in QSORRES. This result is then represented as a standard numeric score in QSSTRESN and as a standard character representation in QSSTRESC. When a result is character only, the result is transformed into the standard character representation in QSSTRESC and QSSTRESN is null.

The table represents the items from the C-SSRS BASELINE instrument.

Update the data in the table below to the current instrument. Include row descriptions as needed to highlight idiosyncrasies or items otherwise of note in this particular instrument. If only 1 or 2 row descriptions are needed, then the information should be included as a paragraph instead.

For the not done visit that is now being included in all QRS supplements, when no reason is collected, information should be included, either in the paragraph before, or as a row description as follows:

When the reason is collected for a not done visit, information or a row description should be added as follows:

We are unable to make the example consistently show blue in the Wiki. All examples are updated for each QRS instrument so we ask that you please review the example below.

The table represents the items from the QRS Short_Name instrument.

Dataset Wrapper Debug Message

Row captions have been provided, but there doesn't seem to be a dataset to which the row captions would apply.

Unable to render dataset table

The table contains merged cells. Please unmerge them.

The following is for illustrative purposes and would not really be included for the IDS-SR instrument in this template. It provides an example of what would need to be included if the instrument required supplemental qualifiers (see Section 5 Supplemental Qualifier Name Codes):

Text that would remain unchanged has been left in black:

The evaluation interval text value for data collection needs to be populated in SUPPQS as follows. The standard terminology for QNAM and QLABEL are listed below.

4 SDTM Mapping Strategy

The SUPPQS dataset shows the items in the QS dataset which have assigned responses due to conditional branching.

4 SDTM Mapping Strategy

This section is used for reference regarding the CRF data capture and to understand the alignment of the instrument to the SDTM QS domain. It also provides guidance on how the result variables (QSORRES, QSSTRESC, and QSSTRESN) should be populated.

QSSCAT alignment with QSTESTCD.

As stated in Section 3.1 assumptions, items on the C-SSRS BASELINE are grouped into subcategories. The table below includes the subcategory names along with the applicable item numbers for each category. The values of the subcategories are used to populate QSSCAT and are annotated on the CRF.

QSTESTCD = "CSS0106" QSTEST = "CSS01-Most Severe Ideation"

QSTESTCD = "CSS0101" QSTEST = "CSS01-Wish to be Dead"

QSTESTCD = "CSS0102" QSTEST = "CSS01-Non-Specific Suicidal Thought"

QSTESTCD = "CSS0103" QSTEST = "CSS01-Suicidal Ideation-No Intent"

QSTESTCD = "CSS0104" QSTEST = "CSS01-Ideation With Intent, No Plan"

QSTESTCD = "CSS0105" QSTEST = "CSS01-Ideation With Plan/Intent"

QSTESTCD = "CSS0112" QSTEST = "CSS01-Actual Attempt"

QSTESTCD = "CSS0114" QSTEST = "CSS01-Non-suicidal Self-injurious Behav"

QSTESTCD = "CSS0115" QSTEST = "CSS01-Interrupted Attempt"

QSTESTCD = "CSS0117" QSTEST = "CSS01-Aborted Attempt"

QSTESTCD = "CSS0119" QSTEST = "CSS01-Preparatory Acts/Behavior"

QSTESTCD = "CSS0120" QSTEST= "CSS01-Suicidal Behavior"

QSTESTCD = "CSS0107" QSTEST = "CSS01-Most Severe Ideation, Frequency"

QSTESTCD = "CSS0108" QSTEST = "CSS01-Most Severe Ideation, Duration"

QSTESTCD = "CSS0109" QSTEST = "CSS01-Most Severe Ideation, Control"

QSTESTCD = "CSS0110" QSTEST = "CSS01-Most Severe Ideation, Deterrents"

QSTESTCD = "CSS0111" QSTEST = "CSS01-Most Severe Ideation, Reasons"

QSTESTCD = "CSS0121B" QSTEST = "CSS01-Most Recent Attempt Damage"

QSTESTCD = "CSS0122B" QSTEST = "CSS01-Most Lethal Attempt Damage"

QSTESTCD = "CSS0123B" QSTEST = "CSS01-First Attempt Damage"

QSTESTCD = "CSS0121C" QSTEST = "CSS01-Most Recent Attempt Potential"

QSTESTCD = "CSS0122C" QSTEST = "CSS01-Most Lethal Attempt Potential"

QSTESTCD = "CSS0123C" QSTEST = "CSS01-First Attempt Potential"

5 Supplemental Qualifier Name Codes

The following table contains additional standard name codes for use in the Supplement Qualifiers for Questionnaires (SUPPQS) special purpose dataset.

End of Document