This is an example showing the report table, trial design, and results from the a study's in vitro bacterial reverse mutation test of an example study, Study #8325064. This bacterial reverse mutation test uses four using 4 different amino acid-requiring strains of Salmonella typhimurium (S. typhimurium) and one 1 strain of Escherichia coli (E. coli) to detect point mutations, which involve substitution, addition or deletion of one or a few DNA base pairs.
In this example, the Trial Summary dataset, ts.xpt, includes many informational fields that may provide context at the study level, for Study 8325064. Also, TSGRPID has been used to link records (name, location, country) related to the test facility (TSGRPID = 1) and records related to the Test Site (TSGRPID = 2). The Study Director is associated with the Test Facility and the Principal Investigator is associated with the Test Site. Finally, the Primary Treatment CAS Registry Number is not known and this is recorded as an empty TSVAL and UNKNOWN in the corresponding TSVALNF.
| Expand |
|---|
| title | Report Table for Example Study 8325064 |
|---|
|
This table shows the assay results for Study 8325064, Test Article TA1, and three strains of Salmonella (TA98, TA100, and TA1535) at varying concentrations. For ease of reference, each row has been labeled in the right hand margin with the sponsor defined trial set label (e.g., SetA). For brevity, the remaining tables (e.g., additional strains, samples prepared without metabolic activation, etc.) are not included.  Image Removed
 Image Removed
|
.
| Expand |
|---|
| title | Report Table for Example Study 8325064 |
|---|
|
This table shows the assay results for study 8325064, test article TA1, and 3 strains of salmonella (TA98, TA100, and TA1535) at varying concentrations. For brevity, the remaining tables (e.g., additional strains, samples prepared without metabolic activation) are not included. For ease of reference in the table below, each row has been labeled in the right-hand margin with the applicant-defined trial set label (e.g., SetA). For brevity, only the four bolded sets are represented in the following example datasets.
Image Added Image Added |
This example Trial Summary (TS) dataset, shows many informational fields that provide context at the study level.
| Dataset wrap |
|---|
| Rowcaps |
|---|
| Rows 1-2: | Show 2 records for TSPARMCD = "GLPTYP", using TSSEQ to indicate multiple records, since both GLP types apply for this study. | | Row 3: | Shows that this study was conducted as a GLP study. | | Rows 4-5: | Show the study start date and study title. | | Rows 6-7: | Show the version of SEND Implementation Guide and version of Controlled Terminology used in this study. | | Row 8: | Shows the applicant's organization. | | Row 9: | Shows that the applicant's study reference ID is not applicable. | | Rows 10-13: | Show that TSGRPID has been used to link records (name, location, country) related to the test facility (TSGRPID=1). The study director is associated with the test facility. | | Rows 14-16: | Show that TSGRPID (TSGRPID=4) has been used to link the information on the testing guideline followed on this study (TSTGDNAM, TSTGDORG, TSTGDVER). | | Shows the study type for this study. | | Shows that this study includes a Bacterial Reverse Mutation Assay. | | Rows 19-27: | Show that TSGRPID (TSGRPID = 2) has been used to link the information for 1 species (salmonella) with the 4 different strains and cell lines that are tested in this study. | | Rows 28-30 |
|
|
| Dataset wrap |
|---|
| Rowcaps |
|---|
| Rows 1-2: | Show two records for TSPARMCD = "GLPTYP", using TSSEQ to indicate multiple records, since both GLP Types apply for this example study. | | Row 8: | Shows that the sponsor's study reference ID is not applicable. | | Rows 9-12: | Show that TSGRPID has been used to link records (name, location, country) related to the test facility (TSGRPID = 1). The Study Director is associated with the Test Facility. | | Rows 18-24: | Show that this example study includes two different species of bacteria and a total of five strains. | | Rows 18-22: | Show that TSGRPID (TSGRPID = 3) has been used to link the information for the strain and cell line that is tested in this | | Rows 23-24: | Show that TSGRPID (TSGRPID = 3) has been used to link the information for one species (Escherichia coli) with the strain that is tested in this example study. |
|
| Dataset2 |
|---|
| | Dataset2 |
|---|
Row | STUDYID | ASSAYID | DOMAIN | TSSEQ | TSGRPID | TSPARMCD | TSPARM | TSVAL | TSVALNF |
|---|
| 1 | 8325064 |
Ames | TS | 1 |
| GLPTYP | Good Laboratory Practice Type | FDA |
| | 2 | 8325064 |
Ames | | TS | 2 |
| GLPTYP | Good Laboratory Practice Type | OECD |
| | 3 | 8325064 |
| TS | 1 |
| GLPFL | GLP Flag | N |
| | 4 | 8325064 |
Ames | TS | 1 |
| STSTDTC | Study Start Date | 2015-07-29 |
4Ames | | TS | 1 |
| STITLE | Study Title | The Bacterial Reverse Mutation Test, Study 8325064-1 |
5Ames | TS | 1 |
| SNDIGVER | SEND Implementation Guide Version | TOBACCO IMPLEMENTATION GUIDE VERSION 1.0 |
6Ames | | TS | 1 |
| SNDCTVER | SEND Controlled Terminology Version | SEND Terminology 2021-09-30 |
7Ames | SSPONSORSponsor Organization Sponsor 8AmesSPREFIDSponsor| Applicant's Study Reference ID |
| NOT APPLICABLE |
9Ames | | TS | 1 | 1 | TSTFNAM | Test Facility Name | Example Tox Lab Name |
10Ames | | TS | 1 | 1 | TSTFLOC | Test Facility Location | 10 Somewhere Street, Montgomery, AL 10000 |
11Ames | | TS | 1 | 1 | TFCNTRY | Test Facility Country | USA |
12Ames | TS | 1 | 1 | STDIR | Study Director | Dr. R. Smith |
13Ames | GLPFL | GLP Flag | N | | 4 | TSTGDNAM | Testing Guideline Name | Test NO. 471 |
| | 15 |
14Ames | ASTD | Assay Standard| TSTGDORG | Testing Guideline Organization | OECD |
Test No. 47115AmesASTDV | | 4 | TSTGDVER | Testing Guideline |
Assay Standard 16Ames | TS | 1 |
| SSTYP | Study Type | GENOTOXICITY IN VITRO |
17Ames | SSSTYP | Study Sub Type | Bacterial Reverse Mutation Test |
| | Genetic Toxicology Assay Identifier | |
| | 19 |
18Ames | Salmonella19Ames | | TS | 1 | 2 | STRAIN | Strain/Substrain | TA98 |
20Ames | 1| 2 | 2 | STRAIN | Strain/Substrain | TA100 |
21Ames | 1| 3 | 2 | STRAIN | Strain/Substrain | TA1535 |
22Ames1| 4 | 2 | STRAIN | Strain/Substrain | TA1537 |
23Ames | 3SPECIESSpecies | Escherichia coli | 24 | 8325064 | Ames | TS | 1 | 3 | STRAIN | Strain | WP2 uvrA pKM101 | |
|
This example trial set dataset, tx.xpt, shows information about the test conditions for SetA and SetR in this example study. For brevity, this does not show information for SetF, SetG, or any other sets. A fully formed tx.xpt for this example study would include information about the test conditions for all sets.
| Cell Line | TA 98 hisD3052; rfa-; uvrB- |
| | 25 | 8325064 | TS | 2 | 2 | CELLLN | Cell Line | TA 100 hisG46; rfa-; uvrB- |
| | 26 | 8325064 | TS | 3 | 2 | CELLLN | Cell Line | TA 1535 hisG46; rfa-; uvrB- |
| | 27 | 8325064 | TS | 4 | 2 | CELLLN | Cell Line | TA 1537 hisC3076; rfa-; uvrB- |
| | 28 | 8325064 | TS | 2 | 3 | SPECIES | Species | |
| | 29 | 8325064 | TS | 5 | 3 | STRAIN | Strain/Substrain | WP2 uvrA pKM101 |
| | 30 | 8325064 | TS | 5 | 3 | CELLLN | Cell Line | trpE uvrA |
|
|
|
This example Trial Set (TX) dataset shows information about the test conditions for SetA and SetR in this study. For brevity, the dataset does not show information for SetF, SetG, or any other sets. A fully formed TX dataset for this example study would include information about the test conditions for all sets.
Note that there are three trial set parameters that link to other important datasets: SPTOBID, APDEVID, and SMKRGM.
- SPTOBID (Applicant-Defined Tobacco Product ID) is used to uniquely identify the tobacco product. The value of SPTOBID (e.g., CIG01a) matches the value for SPTOBID in all the TOPARMCD-TOVAL pairs in the Tobacco Product Identifiers and Descriptors (TO) dataset example in Section 3.1.2, Product Design Parameters and Conformance Testing, Example 1. The TOPARMCD-TOVAL pairs identify this unique product, CIG01a. The TO domain is described in Section 2.8.8.1, Tobacco Product Identifiers and Descriptors (TO).
- The value of APDEVID (e.g., PUFFMASTER3K) matches the value of SPDEVID in all the DIPARMCD-DIVAL pairs that identify this unique device in the DI dataset. SPDEVID is the applicant-defined device identifier that is used to uniquely identify the device in the Unique Device Identification (DI) dataset (see also Section 2.8.9.7, SEND Device Identifiers (DI)). This is shown in the DI dataset in Section 3.1.3.2, HPHCs, Other Constituents, and Smoking/Vaping Regimens, Example 1.
- SMKRGM serves as a link to the Device-In Use Properties (DU) domain (see also Section 2.8.9.8, SEND Device-In-Use (DU)), where a matching value of SMKRGM indicates parameters of the smoking regimen performed by the smoking machine, as in the DU dataset in Section 3.1.3.2, HPHCs, Other Constituents, and Smoking/Vaping Regimens, Example 2.
| Dataset wrap |
|---|
|
| Rowcaps |
|---|
| Rows 1-22: | Show trial set parameters and trial set values that are the test conditions specific to set SetA which is the vehicle control (i.e., Strain of TA98, vehicle control with concentration value of 0). SetA is associated with the first row, labeled "SetA", in the report table for example study 8325064. | | Rows 23-44: | Show trial set parameters and trial set values that comprise the test conditions for the set SetF which is the strain of TA98 with a concentration value of 500 µg/plate. SetF is associated with the sixth row, labeled "SetF", in the report table for example study 8325064. | | Rows 45-66: | Show trial set parameters and trial set values that comprise the test conditions for the set SetG which is the strain of TA98 with a concentration value of 1600 µg/plate. SetG is associated with the seventh row, labeled "SetG", in the report table for example study 8325064. | | Rows 67-88: | Show trial set parameters and trial set values that comprise the test conditions for the set SetR which is the strain of TA100, positive control with a concentration value of 2 µg/plate. SetR is associated with the eighteenth row, labeled "SetR", in the report table for example study 8325064. |
|
|
| Dataset wrap |
|---|
|
| Rowcaps |
|---|
| Rows 1-22: | Show trial set parameters and trial set values that comprise the test conditions for the set SetA. SetA is the data for the vehicle control (i.e., Strain of TA98, vehicle control with concentration value of 0). SetA is associated with the first row, labeled "SetA", in the report table for example study 8325064. | | Rows 23-44: | Show trial set parameters and trial set values that comprise the test conditions for the set SetR. SetR is the data for the vehicle control (i.e., Strain of TA100, positive control with a concentration value of 2). SetR is associated with the eighteenth row, labeled "SetR", in the report table for example study 8325064. | | Dataset2 |
|---|
| | Row | STUDYID | ASSAYID | DOMAIN | SETCD | SET | TXSEQ | TXPARMCD | TXPARM | TXVAL |
|---|
| 1 | 8325064 | Ames | TX | SetA | A-TA98-C0 | 1 | SPECIES | Species | Salmonella typhimurium | | 2 | 8325064 | Ames | TX | SetA | A-TA98-C0 | 2 | STRAIN | Strain/Substrain | TA98 | 3 | 8325064 | Ames | TX | SetA | A-TA98-C0 | 3 | METACT | Metabolic Activation | | 4 | 8325064 | Ames | TX | SetA | A-TA98-C0 | 4 | METACTFL | Y/N presence of metabolic activation | N | | 5 | 8325064 | Ames | TX | SetA | A-TA98-C0 | 5 | TRTDMIN | Treatment Duration Minimum | 71.5 | | 6 | 8325064 | Ames | TX | SetA | A-TA98-C0 | 6 | TRTDTRG | Treatment Duration Target | 72 | | 7 | 8325064 | Ames | TX | SetA | A-TA98-C0 | 7 | TRTDMAX | Treatment Duration Maximum | 72.5 | | 8 | 8325064 | Ames | TX | SetA | A-TA98-C0 | 8 | TRTDU | Treatment Duration Unit | HOURS | | 9 | 8325064 | Ames | TX | SetA | A-TA98-C0 | 9 | INCBTMP | Incubation Temperature | 37 | | 10 | 8325064 | Ames | TX | SetA | A-TA98-C0 | 10 | INCBTMPU | Incubation Temperature Unit | C | | 11 | 8325064 | Ames | TX | SetA | A-TA98-C0 | 11 | HUMID | Atmospheric Relative Humidity Percent | 50 | 12 | 8325064 | Ames | | Row | STUDYID | DOMAIN | SETCD | SET | TXSEQ | TXPARMCD | TXPARM | TXVAL |
|---|
| 1 | 8325064 |
12ATMCO2Atmospheric CO2 Percent | 5 | | Species | SALMONELLA TYPHIMURIUM | | 2 |
13Ames | 13SPTOBID | Sponsor defined tobacco identifier | CIG01a | | IVTDMIN | In vitro Treatment Duration Minimum | 71.5 | | 3 | 8325064 |
14 | 8325064 | Ames14EXPTYP | | Submerged | | IVTDTRG | In vitro Treatment Duration Target | 72 | | 4 |
15Ames | 15SAMTYP | Sample Type | Total Particulate Matter in PBS | | IVTDMAX | In vitro Treatment Duration Maximum | 72.5 | | 5 |
16Ames | 16INTRVN | name of the intervention article | TA1 | | IVTDU | In vitro Treatment Duration Unit | HOURS | | 6 | 8325064 |
17 | 8325064 | Ames17ITVTYPE | type of intervention article | Vehicle Control | 18 | 8325064 | | INCBTMP | Incubation Temperature | 37 | | 7 | 8325064 |
Ames18ITVCONC | Concentration of intervention article | 0 | | INCBTMPU | Incubation Temperature Unit | C | | 8 |
19Ames | 19ITVCONCU | Concentration Unit | ug/plate | | ATMRHP | Atmospheric Relative Humidity Percent | 50 | | 9 | 8325064 |
20 | 8325064 | Ames20TRTV | Treatment Vehicle | DMSO | 21 | 8325064 | | ATMCO2P | Atmospheric CO2 Percent | 5 | | 10 | 8325064 |
Ames21SPDEVIDSponsor device PUFFMASTER3K22Ames | 22DUREFIDSmoke Regimen | Medium Intensity Regimen | 23Ames | SetRRTA100C21SPECIESSpecies | Salmonella typhimurium | 24 | 8325064 | Sample Type | Total Particulate Matter in PBS | | 13 | 8325064 |
AmesSetRRTA100C22STRAIN | Strain/Substrain | TA100 | | APDEVID | Applicant-defined device identifier | PUFFMASTER3K | | 14 |
25Ames | SetRRTA100C23METACT | Metabolic Activation | | Smoking Regimen | NON-INTENSE REGIMEN | | 15 |
26Ames | SetRRTA100C24METACTFLY/N presence of metabolic activation | N | | Strain/Substrain | TA98 | | 16 | 8325064 |
27 | 8325064 | AmesSetRRTA100C25TRTDMIN | Treatment Duration Minimum | 71.5 | | MTACTIND | Metabolic Activating Agent Name | NOT APPLICABLE | | 17 |
28Ames | SetRRTA100C26TRTDTRG | Treatment Duration Target | 72 | | METACTFL | Presence of Metabolic Activation Flag | N | | 18 |
29Ames | SetRRTA100C27TRTDMAX | Treatment Duration Maximum | 72.5 | | ITVNAM | Intervention Article Name | DMSO | | 19 | 8325064 |
30 | 8325064 | AmesSetRRTA100C28TRTDU | Treatment Duration Unit | HOURS | | ITVTYPE | Intervention Article Type | VEHICLE | | 20 |
31Ames | SetRRTA100C29INCBTMP | Incubation Temperature | 37 | 32 | 8325064 | | ITVCONC | Intervention Article Concentration | 100 | | 21 | 8325064 |
AmesSetRRTA100C210INCBTMPU | | ITVCONCU | Intervention Article Concentration |
Incubation Temperature C33AmesSetRRTA100C211HUMID | Atmospheric Relative Humidity Percent | 50 | | TRTV | Treatment Vehicle | DMSO | | 23 |
34Ames | SetRRTA100C212ATMCO2Atmospheric CO2 Percent | 5 | | Species | SALMONELLA TYPHIMURIUM | | 24 |
35AmesSetRRTA100C213SPTOBID | Sponsor defined tobacco identifier | CIG01a | | IVTDMIN | In vitro Treatment Duration Minimum | 71.5 | | 25 |
36Ames | SetRRTA100C214EXPTYP | | Submerged | | IVTDTRG | In vitro Treatment Duration Target | 72 | | 26 |
37Ames | SetRRTA100C215SAMTYP | Sample Type | Total Particulate Matter in PBS | | IVTDMAX | In vitro Treatment Duration Maximum | 72.5 | | 27 |
38Ames | SetRRTA100C216INTRVN | name of the intervention article | TA1 | | IVTDU | In vitro Treatment Duration Unit | HOURS | | 28 |
39Ames | SetRRTA100C217ITVTYPE | type of intervention article | Positive Control | | INCBTMP | Incubation Temperature | 37 | | 29 |
40Ames | SetRRTA100C218ITVCONC | Concentration of intervention article | 2 | | INCBTMPU | Incubation Temperature Unit | C | | 30 |
41Ames | SetRRTA100C219ITVCONCU | Concentration Unit | ug/plate | | ATMRHP | Atmospheric Relative Humidity Percent | 50 | | 31 |
42AmesTXRSetR | TA100C220TRTV | Treatment Vehicle | DMSO | 43 | 8325064 | | ATMCO2P | Atmospheric CO2 Percent | 5 | | 32 | 8325064 |
AmesSetRRTA100C221SPDEVIDSponsor device PUFFMASTER3K44AmesSetRRTA100-C222 | DUREFID | Smoke Regimen | Medium Intensity Regimen | |
|
REFID values are defined by the applicant to uniquely identify the observational unit within an experimental unit. In the simplified picture of an assay (below), the test tube that contains the possible mutagen is an example of an entity that would have a REFID indicating information at the level of trial set. The petri plate created from that test tube and used to count revertant numbers is an example of an entity that would be at an observational level.
This picture does not depict the more complicated procedures, trial sets, or observational units for our example study, 8325064.
Image Removed
Observational Unit Identifiers (OBUIDs) are defined by the sponsor to uniquely identify the observational unit within an experimental unit. In this example the sponsor chose to define the EUIDs based on trial sets (e.g., F) and OBUIDs based on the position of the tube in one of multiple exposure/incubation plates (e.g, 6_1 for plate 6, position 1).
| TA98-C500 | 33 | EXPTYP | | Submerged | | 34 | 8325064 | TX | SetF | F-TA98-C500 | 34 | SAMTYP | Sample Type | Total Particulate Matter in PBS | | 35 | 8325064 | TX | SetF | F-TA98-C500 | 35 | APDEVID | Applicant-defined device identifier | PUFFMASTER3K | | 36 | 8325064 | TX | SetF | F-TA98-C500 | 36 | SMKRGM | Smoking Regimen | NON-INTENSE REGIMEN | | 37 | 8325064 | TX | SetF | F-TA98-C500 | 37 | STRAIN | Strain/Substrain | TA98 | | 38 | 8325064 | TX | SetF | F-TA98-C500 | 38 | MTACTIND | Metabolic Activating Agent Name | NOT APPLICABLE | | 39 | 8325064 | TX | SetF | F-TA98-C500 | 39 | METACTFL | Presence of Metabolic Activation Flag | N | | 40 | 8325064 | TX | SetF | F-TA98-C500 | 40 | ITVNAM | Intervention Article Name | TA1 | | 41 | 8325064 | TX | SetF | F-TA98-C500 | 41 | ITVTYPE | Intervention Article Type | PRODUCT | | 42 | 8325064 | TX | SetF | F-TA98-C500 | 42 | ITVCONC | Intervention Article Concentration | 500 | | 43 | 8325064 | TX | SetF | F-TA98-C500 | 43 | ITVCONCU | Intervention Article Concentration Unit | ug/plate | | 44 | 8325064 | TX | SetF | F-TA98-C500 | 44 | TRTV | Treatment Vehicle | DMSO | | 45 | 8325064 | TX | SetG | G-TA98-C1600 | 45 | SPECIES | Species | SALMONELLA TYPHIMURIUM | | 46 | 8325064 | TX | SetG | G-TA98-C1600 | 46 | IVTDMIN | In vitro Treatment Duration Minimum | 71.5 | | 47 | 8325064 | TX | SetG | G-TA98-C1600 | 47 | IVTDTRG | In vitro Treatment Duration Target | 72 | | 48 | 8325064 | TX | SetG | G-TA98-C1600 | 48 | IVTDMAX | In vitro Treatment Duration Maximum | 72.5 | | 49 | 8325064 | TX | SetG | G-TA98-C1600 | 49 | IVTDU | In vitro Treatment Duration Unit | HOURS | | 50 | 8325064 | TX | SetG | G-TA98-C1600 | 50 | INCBTMP | Incubation Temperature | 37 | | 51 | 8325064 | TX | SetG | G-TA98-C1600 | 51 | INCBTMPU | Incubation Temperature Unit | C | | 52 | 8325064 | TX | SetG | G-TA98-C1600 | 52 | ATMRHP | Atmospheric Relative Humidity Percent | 50 | | 53 | 8325064 | TX | SetG | G-TA98-C1600 | 53 | ATMCO2P | Atmospheric CO2 Percent | 5 | | 54 | 8325064 | TX | SetG | G-TA98-C1600 | 54 | SPTOBID | Applicant-defined tobacco identifier | CIG01a | | 55 | 8325064 | TX | SetG | G-TA98-C1600 | 55 | EXPTYP | | Submerged | | 56 | 8325064 | TX | SetG | G-TA98-C1600 | 56 | SAMTYP | Sample Type | Total Particulate Matter in PBS | | 57 | 8325064 | TX | SetG | G-TA98-C1600 | 57 | APDEVID | Applicant-defined device identifier | PUFFMASTER3K | | 58 | 8325064 | TX | SetG | G-TA98-C1600 | 58 | SMKRGM | Smoking Regimen | NON-INTENSE REGIMEN | | 59 | 8325064 | TX | SetG | G-TA98-C1600 | 59 | STRAIN | Strain/Substrain | TA98 | | 60 | 8325064 | TX | SetG | G-TA98-C1600 | 60 | MTACTIND | Metabolic Activating Agent Name | NOT APPLICABLE | | 61 | 8325064 | TX | SetG | G-TA98-C1600 | 61 | METACTFL | Presence of Metabolic Activation Flag | N | | 62 | 8325064 | TX | SetG | G-TA98-C1600 | 62 | ITVNAM | Intervention Article Name | TA1 | | 63 | 8325064 | TX | SetG | G-TA98-C1600 | 63 | ITVTYPE | Intervention Article Type | Product | | 64 | 8325064 | TX | SetG | G-TA98-C1600 | 64 | ITVCONC | Intervention Article Concentration | 1600 | | 65 | 8325064 | TX | SetG | G-TA98-C1600 | 65 | ITVCONCU | Intervention Article Concentration Unit | ug/plate | | 66 | 8325064 | TX | SetG | G-TA98-C1600 | 66 | TRTV | Treatment Vehicle | DMSO | | 67 | 8325064 | TX | SetR | R-TA100-C2 | 67 | SPECIES | Species | SALMONELLA TYPHIMURIUM | | 68 | 8325064 | TX | SetR | R-TA100-C2 | 68 | IVTDMIN | In vitro Treatment Duration Minimum | 71.5 | | 69 | 8325064 | TX | SetR | R-TA100-C2 | 69 | IVTDTRG | In vitro Treatment Duration Target | 72 | | 70 | 8325064 | TX | SetR | R-TA100-C2 | 70 | IVTDMAX | In vitro Treatment Duration Maximum | 72.5 | | 71 | 8325064 | TX | SetR | R-TA100-C2 | 71 | IVTDU | In vitro Treatment Duration Unit | HOURS | | 72 | 8325064 | TX | SetR | R-TA100-C2 | 72 | INCBTMP | Incubation Temperature | 37 | | 73 | 8325064 | TX | SetR | R-TA100-C2 | 73 | INCBTMPU | Incubation Temperature Unit | C | | 74 | 8325064 | TX | SetR | R-TA100-C2 | 74 | ATMRHP | Atmospheric Relative Humidity Percent | 50 | | 75 | 8325064 | TX | SetR | R-TA100-C2 | 75 | ATMCO2P | Atmospheric CO2 Percent | 5 | | 76 | 8325064 | TX | SetR | R-TA100-C2 | 76 | SPTOBID | Applicant-defined tobacco identifier | CIG01a | | 77 | 8325064 | TX | SetR | R-TA100-C2 | 77 | EXPTYP | | Submerged | | 78 | 8325064 | TX | SetR | R-TA100-C2 | 78 | SAMTYP | Sample Type | Total Particulate Matter in PBS | | 79 | 8325064 | TX | SetR | R-TA100-C2 | 79 | APDEVID | Applicant-defined device identifier | PUFFMASTER3K | | 80 | 8325064 | TX | SetR | R-TA100-C2 | 80 | SMKRGM | Smoking Regimen | NON-INTENSE REGIMEN | | 81 | 8325064 | TX | SetR | R-TA100-C2 | 81 | STRAIN | Strain/Substrain | TA100 | | 82 | 8325064 | TX | SetR | R-TA100-C2 | 82 | MTACTIND | Metabolic Activating Agent Name | NOT APPLICABLE | | 83 | 8325064 | TX | SetR | R-TA100-C2 | 83 | METACTFL | Presence of Metabolic Activation Flag | N | | 84 | 8325064 | TX | SetR | R-TA100-C2 | 84 | ITVNAM | Intervention Article Name | NaN3 | | 85 | 8325064 | TX | SetR | R-TA100-C2 | 85 | ITVTYPE | Intervention Article Type | Positive Control | | 86 | 8325064 | TX | SetR | R-TA100-C2 | 86 | ITVCONC | Intervention Article Concentration | 2 | | 87 | 8325064 | TX | SetR | R-TA100-C2 | 87 | ITVCONCU | Intervention Article Concentration Unit | ug/plate | | 88 | 8325064 | TX | SetR | R-TA100-C2 | 88 | TRTV | Treatment Vehicle | DMSO |
|
|
REFID values are defined by the applicant to uniquely identify the observational unit within an experimental unit. In the simplified diagram of an assay procedure (below), the test tube that contains the possible mutagen is an example of an entity that would have a REFID indicating information at the level of trial set. The petri plate created from that test tube and used to count revertant numbers is an example of an entity that would be at an observational level.
This picture does not depict the more complicated procedures, trial sets, or observational units for the example study. For study 8325064, the applicant chose to define the REFIDs at the trial set level with a single character (e.g., A, F, G, R) and chose to define REFIDs at the observational level based on the location of each tube in 1 of multiple exposure/incubation plates (e.g, 6_1 for plate 6, position 1).
Image Added
| Dataset wrap |
|---|
|
| Rowcaps |
|---|
| Row 1: | Shows the value of REFID=A. This REFID refers to the trial set with a SETCD of "SetA", as defined in the TX dataset. LEVEL=1 and LVLDESC="EXPERIMENTAL UNIT/TRIAL SET". TRIAL SET indicates this identifier relates to the entire trial set. EXPERIMENTAL UNIT indicates this identifier received the intervention article, DMSO. | | Rows 2-6: | Show the values of 5 observational units (1_1 through 1_5) that are within the parent experimental unit, REFID=A. | | Row 7: | Shows the value of REFID=F. This REFID refers to the trial set with a SETCD of "SetF", as defined in the TX dataset. LEVEL=1 and LVLDESC="EXPERIMENTAL UNIT/TRIAL SET". TRIAL SET indicates this identifier relates to the entire trial set. EXPERIMENTAL UNIT indicates this identifier received the intervention article, TA1. | | Rows 8-10: | Show the values of 3 observational units (6_1 through 6_3) that are within the parent experimental unit, REFID=F. | | Row 11: | Shows the value of REFID=G. This REFID refers to the trial set with a SETCD of "SetG", as defined in the TX dataset. LEVEL=1 and LVLDESC="EXPERIMENTAL UNIT/TRIAL SET". TRIAL SET indicates this identifier relates to the entire trial set. EXPERIMENTAL UNIT indicates this identifier received the intervention article, TA1. | | Rows 12-14: | Show the values of 3 observational units (7_1 through 7_3) that are within the parent experimental unit, REFID=G. | | Row 15: | Shows the value of REFID=R. This REFID refers to the trial set with a SETCD of "SetG", as defined in the TX dataset. LEVEL=1 and LVLDESC="EXPERIMENTAL UNIT/TRIAL SET". TRIAL SET indicates this identifier relates to the entire trial set. EXPERIMENTAL UNIT indicates this identifier received the intervention article, NaN3. | | Rows 16-18: | Show the values of 3 observational units (18_1 through 18_3) that are within the parent experimental unit, REFID=R. |
|
| Dataset2 |
|---|
| Row | STUDYID | SETCD | REFID | PARENT | LEVEL | LVLDESC |
|---|
1 | 8325064 | SetA | A |
| 1 | EXPERIMENTAL UNIT/TRIAL SET |
|---|
2 | 8325064 | SetA | 1_1 | A | 2 | OBSERVATIONAL UNIT |
|---|
3 | 8325064 | SetA | 1_2 | A | 2 | OBSERVATIONAL UNIT |
|---|
4 | 8325064 | SetA | 1_3 | A | 2 | OBSERVATIONAL UNIT |
|---|
5 | 8325064 | SetA | 1_4 | A | 2 | OBSERVATIONAL UNIT |
|---|
6 | 8325064 | SetA | 1_5 | A | 2 | OBSERVATIONAL UNIT |
|---|
7 | 8325064 | SetF | F |
| 1 | EXPERIMENTAL UNIT/TRIAL SET |
|---|
8 | 8325064 | SetF | 6_1 | F | 2 | OBSERVATIONAL UNIT |
|---|
9 | 8325064 | SetF | 6_2 | F | 2 | OBSERVATIONAL UNIT |
|---|
10 | 8325064 | SetF | 6_3 | F | 2 | OBSERVATIONAL UNIT |
|---|
11 | 8325064 | SetG | G |
| 1 | EXPERIMENTAL UNIT/TRIAL SET |
|---|
12 | 8325064 | SetG | 7_1 | G | 2 | OBSERVATIONAL UNIT |
|---|
13 | 8325064 | SetG | 7_2 | G | 2 | OBSERVATIONAL UNIT |
|---|
| 14 | 8325064 | SetG | 7_3 | G | 2 | OBSERVATIONAL UNIT | | 15 | 8325064 | SetR | R |
| 1 | EXPERIMENTAL UNIT/TRIAL SET | | 16 | 8325064 | SetR | 18_1 | R | 2 | OBSERVATIONAL UNIT | | 17 | 8325064 | SetR | 18_2 | R | 2 | OBSERVATIONAL UNIT | | 18 | 8325064 | SetR | 18_3 | R | 2 | OBSERVATIONAL UNIT |
|
|
| Dataset wrap |
|---|
|
| Rowcaps |
|---|
| Rows 1-5: | Show the number of revertant colonies per plate collected for each of 5 observational units, GTREFID=1_1 through 1_5 (see description in the RELREF dataset). | | Rows 6, 7: | Show summary values collected (mean, standard deviation) for GTREFID=A that apply to the entire trial set, SetA, as indicated by LEVEL=1 and LVLDESC=TRIAL SET for this REFID as shown in the RELREF dataset. | | Rows 8-13: | Revertent colonies were counted for each of 3 plates/observational units (GTREFID=6_1 through 6_3) and each value is associated with a record to show a postfix code of "V" (Very thin background bacterial lawn). | | Rows 14-16: | Show summary values collected (mean, standard deviation, fold increase) for GTREFID=F that apply to the entire trial set, SetF, as indicated by LEVEL=1 and LVLDESC=TRIAL SET for this REFID in the RELREF dataset. | | Rows 17-19: | Show 3 plates/observational units (GTREFID=7_1 through 7_3) where no revertant colonies were counted due to too much cytotoxicity and a postfix code of "T". | Jira |
|---|
| showSummary | false |
|---|
| server | Issue Tracker (JIRA) |
|---|
| columnIds | issuekey,summary,issuetype,created,updated,duedate,assignee,reporter,priority,status,resolution |
|---|
| columns | key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution |
|---|
| serverId | 85506ce4-3cb3-3d91-85ee-f633aaaf4a45 |
|---|
| key | TOBA-668 |
|---|
|
| | Rows 20-22: | Show the number of revertant colonies per plate collected for each of 3 observational units (GTREFID=18_1 through 18_3). | | Rows 23-25: | Show summary values collected (mean, standard deviation, fold increase) for GTREFID=R that apply to the entire trial set, SetR, as indicated by LEVEL=1 and LVLDESC=TRIAL SET for this REFID in the RELREF dataset. |
|
| Dataset2 |
|---|
| Row | STUDYID | DOMAIN | GTSEQ | GTREFID | GTTESTCD | GTTEST | GTORRES | GTORRESU | GTCOLSRT |
|---|
|
|
| Dataset wrap |
|---|
|
| Rowcaps |
|---|
| Rows 1-5: | Show the values for OBUID within the experimental unit identifier, A, for Set A, as defined in the trial set dataset. |
| Rows 6-8: | Show the values for OBUID within the experimental unit identifier, F, for Set F, as defined in the trial set dataset. |
| Rows 9-11: | Show the values for OBUID within the experimental unit identifier, G, for Set G, as defined in the trial set dataset. |
| Rows 12-14: | Show the values for OBUID within the experimental unit identifier, R, for Set R, as defined in the trial set dataset. |
For study 8325064, the applicant chose to define the REFIDs at the trial set level on trial sets (e.g., A, F, G, and R) and based on the position of the tube in one of multiple exposure/incubation plates (e.g, 6_1 for plate 6, position 1).
Observational Unit Identifiers (OBUIDs) are defined by the sponsor to uniquely identify the observational unit within an experimental unit. In this example the sponsor chose to define the EUIDs based on trial sets (e.g., F) and OBUIDs based on the position of the tube in one of multiple exposure/incubation plates (e.g, 6_1 for plate 6, position 1).
| Dataset2 |
|---|
|
Row | STUDYID | ASSAYID | SETCD | REFID | PARENT | LEVEL | LVLDESC |
|---|
1 | 8325064 | Ames | SetA | A | 1 | TRIAL SET | 2 | 8325064 | Ames | SetA | 0_1 | A | 2 | OBSERVATIONAL UNIT |
|---|
3 | 8325064 | Ames | SetA | 0_2 | A | 2 | OBSERVATIONAL UNIT |
|---|
4 | 8325064 | Ames | SetA | 0_3 | A | 2 | OBSERVATIONAL UNIT |
|---|
5 | 8325064 | Ames | SetA | 0_4 | A | 2 | OBSERVATIONAL UNIT |
|---|
6 | 8325064 | Ames | SetA | 0_5 | A | 2 | OBSERVATIONAL UNIT |
|---|
7 | 8325064 | Ames | SetF | F | 1 | TRIAL SET | 8 | 8325064 | Ames | SetF | 6_1 | F | 2 | OBSERVATIONAL UNIT |
|---|
9 | 8325064 | Ames | SetF | 6_2 | F | 2 | OBSERVATIONAL UNIT |
|---|
10 | 8325064 | Ames | SetF | 6_3 | F | 2 | OBSERVATIONAL UNIT |
|---|
11 | 8325064 | Ames | SetG | G | 1 | TRIAL SET | 12 | 8325064 | Ames | SetG | 7_1 | G | 2 | OBSERVATIONAL UNIT |
|---|
13 | 8325064 | Ames | SetG | 7_2 | G | 2 | OBSERVATIONAL UNIT |
|---|
| 14 | 8325064 | Ames | SetG | 7_3 | G | 2 | OBSERVATIONAL UNIT |
15 | 8325064 | Ames | SetG | R | 1 | TRIAL SET | | 16 | 8325064 | Ames | SetR | 18_1 | R | 2 | OBSERVATIONAL UNIT |
| 17 | 8325064 | Ames | SetR | 18_2 | R | 2 | OBSERVATIONAL UNIT |
| 18 | 8325064 | Ames | SetR | 18_3 | R | 2 | OBSERVATIONAL UNIT |
| Dataset wrap |
|---|
|
| Rowcaps |
|---|
| Rows 1-7: | Show values collected for the trial set, SetA. |
| Rows 8-16: | Show values collected for the trial set, SetF. Revertent colonies were counted and each value is associated with a record to show a postfix of code of "V". |
| Rows 17-19: | Show values collected for the trial set, SetG. Each record for this EUID shows the postfix code of "T". No revertent colonies were counted and there are no summary values collected. |
| Rows 20-25: | Show values collected for the trial set, SetR. |
| Rows 6-7, 14-16, 23-25: | Show summary values collected (e.g., MEAN, STANDARD DEVIATION, and/or FOLD INCREASE) that apply to the entire trial set, as indicated by the LVLDESC=TRIAL SET for these REFID values in the relref dataset. |
| Dataset2 |
|---|
| Row | STUDYID | ASSAYID | DOMAIN | GTSEQ | REFID | GTTESTCD | GTTEST | GTORRES | GTORRESU | GTCOLSRT | GTSTRESC | GTSTRESN | GTSTRESU | GTSTAT | GTREASND | GTMETHOD | GTDTC |
|---|
1 | 8325064 | Ames | GT | 1 | 0_1 | RPP | Revertant Numbers Per Plate | 26 | COLONIES | 26 | 26 | COLONIES | INSTRUMENT COUNTED | 2015-08-03 | 2 | 8325064 | Ames | GT | 2 | 0_2 | RPP | Revertant Numbers Per Plate | 35 | COLONIES | 35 | 35 | COLONIES | INSTRUMENT COUNTED | 2015-08-03 | 3 | 8325064 | Ames | GT | 3 | 0_3 | RPP | Revertant Numbers Per Plate | 39 | COLONIES | 39 | 39 | COLONIES | INSTRUMENT COUNTED | 2015-08-03 | 4 | 8325064 | Ames | GT | 4 | 0_4 | RPP | Revertant Numbers Per Plate | 35 | COLONIES | 35 | 35 | COLONIES | INSTRUMENT COUNTED | 2015-08-03 | 5 | 8325064 | Ames | GT | 5 | 0_5 | RPP | Revertant Numbers Per Plate | 30 | COLONIES | 30 | 30 | COLONIES | INSTRUMENT COUNTED | 2015-08-03 | 6 | 8325064 | Ames | GT | 6 | A | RPP | Revertant Numbers Per Plate | 33.0 | COLONIES | MEAN | 33.0 | 33.0 | COLONIES | 2015-08-03 | 7 | 8325064 | Ames | GT | 7 | A | RPP | Revertant Numbers Per Plate | 5.0 | COLONIES | STANDARD DEVIATION | 5.0 | 5.0 | COLONIES | 2015-08-03 | 8 | 8325064 | Ames | GT | 1 | 6_1 | RPP | Revertant Numbers Per Plate | 8 | COLONIES | 8 | 8 | COLONIES | MANUALLY COUNTED | 2015-08-03 | 9 | 8325064 | Ames | GT | 2 | 6_1 | CYTOTOX | Cytotoxicity | Very thin background bacterial lawn | V | 2015-08-03 | 10 | 8325064 | Ames | GT | 3 | 6_2 | RPP | Revertant Numbers Per Plate | 10 | COLONIES | 10 | 10 | COLONIES | MANUALLY COUNTED | 2015-08-03 | 11 | 8325064 | Ames | GT | 4 | 6_2 | CYTOTOX | Cytotoxicity | Very thin background bacterial lawn | V | 2015-08-03 | 12 | 8325064 | Ames | GT | 5 | 6_3 | RPP | Revertant Numbers Per Plate | 12 | COLONIES | 12 | 12 | COLONIES | MANUALLY COUNTED | 2015-08-03 | 13 | 8325064 | Ames | GT | 6 | 6_3 | CYTOTOX | Cytotoxicity | Very thin background bacterial lawn | V | 2015-08-03 | 14 | 8325064 | Ames | GT | 7 | F | RPPMEAN | Mean of Revertant Numbers Per Plate | 10.0 | COLONIES | MEAN | 10.0 | 10.0 | COLONIES | 2015-08-03 | 15 | 8325064 | Ames | GT | 8 | F | RPPSTDDV | Standard Deviation of Revertant Numbers Per Plate | 2.0 | COLONIES | STANDARD DEVIATION | 2.0 | 2.0 | COLONIES | 2015-08-03 | 16 | 8325064 | Ames | GT | 9 | F | RPPFDINC | Fold Increase of Revertant Numbers Per Plate | 0.3 | COLONIES | FOLD INCREASE | 0.3 | 0.3 | COLONIES | 2015-08-03 | 17 | 8325064 | Ames | GT | 1 | 5_1 | CYTOTOX | Cytotoxicity | Toxic No Revertant Colonies | T | NOT DONE | TOO MUCH CYTOTOXICITY | 2015-08-03 | 18 | 8325064 | Ames | GT | 2 | 5_2 | CYTOTOX | Cytotoxicity | Toxic No Revertant Colonies | T | NOT DONE | TOO MUCH CYTOTOXICITY | 2015-08-03 | 19 | 8325064 | Ames | GT | 3 | 5_3 | CYTOTOX | Cytotoxicity | Toxic No Revertant Colonies | T | NOT DONE | TOO MUCH CYTOTOXICITY | 2015-08-03 | 20 | 8325064 | Ames | GT | 1 | 18_1 | RPP | Revertant Numbers Per Plate | 812 | COLONIES | 812 | 812 | COLONIES | INSTRUMENT COUNTED | 2015-08-03 | 21 | 8325064 | Ames | GT | 2 | 18_2 | RPP | Revertant Numbers Per Plate | 912 | COLONIES | 912 | 912 | COLONIES | INSTRUMENT COUNTED | 2015-08-03 | 22 | 8325064 | Ames | GT | 3 | 18_3 | RPP | Revertant Numbers Per Plate | 839 | COLONIES | 839 | 839 | COLONIES | INSTRUMENT COUNTED | 2015-08-03 | 23 | 8325064 | Ames | GT | 4 | R | RPPMEAN | Mean of Revertant Numbers Per Plate | 854.3 | COLONIES | MEAN | 854.3 | 854.3 | COLONIES | 2015-08-03 | 24 | 8325064 | Ames | GT | 5 | R | RPPSTDDV | Standard Deviation of Revertant Numbers Per Plate | 51.7 | COLONIES | STANDARD DEVIATION | 51.7 | 51.7 | COLONIES | 2015-08-03 | 25 | 8325064 | Ames | GT | 6 | R | RPPFLDINC | Fold Increase of Revertant Numbers Per Plate | 6.4 | COLONIES | FOLD INCREASE | 6.4 | 6.4 | COLONIES | 2015-08-03 | | Dataset wrap |
|---|
|
| Rowcaps |
|---|
| Rows 1-7: | Show values collected for the set, SetA. | | Rows 8-16: | Show values collected for the set, SetF. Revertent colonies were counted and each value is associated with a record to show a postfix of code of "V". | | Rows 17-19: | Show values collected for the set, SetG. Each record for this EUID shows the postfix code of "T". No revertent colonies were counted and there are no summary values collected. | | Rows 20-25: | Show values collected for the set, SetR. | | Rows 6-7, 14-16, 23-25: | Show summary values collected (e.g., MEAN, STANDARD DEVIATION, and/or FOLD INCREASE) that apply to all of the observational units and the entire experimental unit, as shown by OBUID = "ALL" and EUID = "ALL". | | Dataset2 |
|---|
| Row | STUDYID | ASSAYID | DOMAIN | TXSETCD | EUID | OUID | GTSEQ | GTTESTCD | GTTEST | GTORRES | GTORRESU | GTCOLSRT (coll. summ. result type) | GTSTRESC | GTSTRESN | GTSTRESU | GTSTAT | GTREASND | GTMETHOD | GTDTC |
|---|
| 1 | 8325064 |
Ames | SETA0A | 1| 1 | RPP | Revertant Colony Numbers Per Plate | 26 |
COLONIESCOLONIES | |
|
| INSTRUMENT COUNTED | 2015-08-03 | | 2 | 8325064 |
Ames | SETA0A | 2| 2 | RPP | Revertant Colony Numbers Per Plate | 35 |
COLONIES | COLONIES |
|
|
| INSTRUMENT COUNTED | 2015-08-03 | | 3 | 8325064 |
Ames | SETA0A | 3 | | RPP | Revertant Colony Numbers Per Plate | 39 |
COLONIES | COLONIES |
|
|
| INSTRUMENT COUNTED | 2015-08-03 | | 4 | 8325064 |
AmesSETA0A | 4 | | RPP | Revertant Colony Numbers Per Plate | 35 |
COLONIESCOLONIES |
|
|
| INSTRUMENT COUNTED | 2015-08-03 | | 5 | 8325064 |
AmesSETA0A | 5 | | RPP | Revertant Colony Numbers Per Plate | 30 |
COLONIESCOLONIES |
|
|
| INSTRUMENT COUNTED | 2015-08-03 | | 6 | 8325064 |
Ames | SETAALL | 6 | | RPP | Revertant Colony Numbers Per Plate | 33.0 |
COLONIESCOLONIESAmes | SETAALL | 7 | RPP | Revertant Colony Numbers Per Plate | 5.0 |
COLONIES | COLONIESAmesSETFF | 1 | | RPP | Revertant Colony Numbers Per Plate | 8 |
COLONIESCOLONIES |
|
|
| MANUALLY COUNTED | 2015-08-03 | | 9 | 8325064 |
Ames | SETFF | 2 | | CYTOTOX | Cytotoxicity | Very thin background bacterial lawn |
|
| V |
|
|
|
|
| 2015-08-03 | | 10 | 8325064 |
AmesSETFF3 | RPP | Revertant Colony Numbers Per Plate | 10 |
COLONIES | COLONIES |
|
|
| MANUALLY COUNTED | 2015-08-03 | | 11 | 8325064 |
AmesFSETF | 2 | | CYTOTOX | Cytotoxicity | Very thin background bacterial lawn |
|
| V |
|
|
|
|
| 2015-08-03 | | 12 | 8325064 |
Ames | SETFF | 4 | RPP | Revertant Colony Numbers Per Plate | 12 |
COLONIES | COLONIES |
|
|
| MANUALLY COUNTED | 2015-08-03 | | 13 | 8325064 |
Ames | SETFF | 2 | CYTOTOX | Cytotoxicity | Very thin background bacterial lawn |
|
| V |
|
|
|
|
| 2015-08-03 | | 14 | 8325064 |
AmesSETF | ALL | ALL | 5 of Revertant Numbers | Rev Colony Num Per Plate | 10.0 |
COLONIES | COLONIES | Ames | SETFALLALL | 6 | Standard Deviation of Revertant Numbers | Std Dev Rev Colony Num Per Plate | 2.0 |
COLONIES | COLONIESAmesSETFALL | ALL | 7 | RPPFDINC of Revertant Numbers | Rev Colony Num Per Plate | 0.3 |
COLONIESCOLONIESAmes | SETG5G | 1 | | CYTOTOX | Cytotoxicity | Toxic No Revertant Colonies |
|
| T |
|
| NOT DONE | TOO MUCH CYTOTOXICITY |
| 2015-08-03 | | 18 | 8325064 |
AmesSETG5G | 2 | | CYTOTOX | Cytotoxicity | Toxic No Revertant Colonies |
|
| T |
|
| NOT DONE | TOO MUCH CYTOTOXICITY |
| 2015-08-03 | | 19 | 8325064 |
AmesSETG5G | 3 | | CYTOTOX | Cytotoxicity | Toxic No Revertant Colonies |
|
| T |
|
| NOT DONE | TOO MUCH CYTOTOXICITY |
| 2015-08-03 | | 20 | 8325064 |
Ames | SETRR | 1| 1 | RPP | Revertant Colony Numbers Per Plate | 812 |
COLONIES | COLONIES |
|
|
| INSTRUMENT COUNTED | 2015-08-03 | | 21 | 8325064 |
Ames | SETRR | 2| 2 | RPP | Revertant Colony Numbers Per Plate | 912 |
COLONIES | COLONIES |
|
|
| INSTRUMENT COUNTED | 2015-08-03 | | 22 | 8325064 |
AmesRSETR | 3 | | RPP | Revertant Colony Numbers Per Plate | 839 |
COLONIESCOLONIES |
|
|
| INSTRUMENT COUNTED | 2015-08-03 | | 23 | 8325064 |
Ames | SETRALL | 4 of Revertant Numbers | Rev Colony Num Per Plate | 854.3 |
COLONIES | COLONIES | AmesSETRALL | 5Standard Deviation of Revertant Numbers | Std Dev Rev Colony Num Per Plate | 51.7 |
COLONIES |
| STANDARD DEVIATION | 51.7 | 51.7 |
COLONIES | Ames | SETR6ALL | RPPFLDINC | of Revertant Numbers | Rev Colony Num Per Plate | 6.4 |
COLONIES | COLONIES |
|