Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
  • Copy QS Template page and move to the Initial development (not ready for review) page. Please DO NOT OVERWRITE the template pages.
    1. If the supplement is based on a measurement system, such as PRO-CTCAE V1.0, FACIT, PROMIS, etc., replace the word instrument with measurement system throughout the supplement.
  • The "–" in this template represents the domain implemented for the instrument. This is replaced with the 2-character domain abbreviation of FT, QS, or RS that is used for the instrument.
  • Change the title of the page as follows:
    1. Remove 'Copy of QRS Supplement Template - '.
    2. Replace 'Name of QRS Instrument' with the full name of the QRS instrument the supplement is being created for.
    3. Change 'QRS Short_Name' to the short name (--CAT) for the current instrument.
  • Update the information in the Page Properties block below as indicated in the block below.
    1. The supplement version number in the header section will be 'v1' if there has never been a supplement for the instrument before. Otherwise, increment as appropriate.
    2. If the CRF was copyright approved, keep 'Approved'; otherwise change 'Approved' to 'Public Domain'.
  • Replace 'Title' and 'QRS Short_Name' throughout the document with the title and short name of the instrument that the supplement is being created for.
  • Replace royal blue text with information pertaining to the instrument the supplement is being created for. Delete royal blue text which does not apply to the new instrument.
  • Unless otherwise noted, text in black applies to all QRS Supplements and should not be deleted, but should be examined carefully and revised as appropriate based on the specific instrument supplement as needed. Any changes need to be in blue font to stand out for review.
  • Change QS to RS or FT and 'Questionnaires' to 'Disease Response and Clin Classification' or 'Functional Tests' as appropriate.
  • Remove all information blocks, except for the one immediately below this called 'Information for Reviewers'.
  • Keep changes in blue for ease throughout internal and public review. Once the supplement has gone thru public review and all comments are resolved, change all text color to black except for hyperlinks.
  • Arabic numerals (0, 1, 2, 3, etc.)are used to express numbers in most circumstances. Exceptions are the following: 
  • Numbers that begin a sentence, title, subtitle, or heading 
  • Common fractions 

  • Accepted usage such as idiomatic expressions and numbers used as pronouns 

  • Other uses of “one” in running text (e.g., when meaning "a")
  • Ordinals first through ninth
  • Numbers spelled out in quotes or published titles.
    Info
    titlecolor coding

    Green = Recent FDA Changes

    Pink = Instructional information for developers

    Blue = Text can change from supplement to supplement based on the instrument

    Black = Standard template language

    Info
    titleInstructions on how to use this template
    Information for Reviewers

    Text in black is part of the template used to create this document and is not revised under CDISC internal or public review. Please review the blue text; this text represents the changes made to the template that are specific to this QRS instrument.

    Page properties
    Title

    Questionnaire on Smoking Urges-Brief (QSU-BRIEF)

    CDISC ReferenceQuestionnaire Supplement to the Study Data Tabulation Model Implementation Guide for Human Clinical Trials
    QRS Short Name

    QSU-BRIEF

    QRS Permission StatusApproved
    TeamTobacco Standards Teamand CDISC Questionnaires, Ratings, and Scales (QRS) Subteam
    Supplement Version1.0
    StatusDRAFT
    Date2024-04-08
    Notes to Readers
    • This supplement is available to be used with other CDISC user guides for specific therapeutic/disease areas and follows the CDISC Study Data Tabulation Model Implementation Guide for Human Clinical Trials.


    Revision History

    DateVersion
    2024-04-081.0 Draft

    © 2024 Clinical Data Interchange Standards Consortium, Inc. All rights reserved. 

    1 Introduction

    This document describes the CDISC implementation of the Questionnaire on Smoking Urges-Brief (QSU-BRIEF) instrument.

    CDISC did not modify this questionnaires, ratings, and scales (QRS) instrument to meet Clinical Data Acquisition Standards Harmonization (CDASH) case report form (CRF) standards.

    The representation of data collected for this instrument is based on the Study Data Tabulation Model Implementation Guide (SDTMIG) Questionnaires (QS) domain model, which can be found on the CDISC website at: https://www.cdisc.org/standards/foundational/sdtmig.

    The specific implementation details for this instrument are meant to be used in conjunction with the SDTMIG. All CDISC QRS documentation packages can be found on the CDISC website at: https://www.cdisc.org/standards/foundational/qrs.

    The CDISC Intellectual Property Policy can be found on the CDISC website at: https://www.cdisc.org/about/bylaws.

    1.1 Representations and Warranties, Limitations of Liability, and Disclaimers

    This document is a supplement to the SDTMIG for Human Clinical Trials and is covered under Appendix F of that document, which describes representations, warranties, limitations of liability, and disclaimers. Please see Appendix F of the SDTMIG for a complete version of this material.

    CDISC specifies how to structure the data that has been collected in a database, not what should be collected or how to conduct clinical assessments orimplement protocols. CDISC disclaims any liability for your use of this material.

    2 Copyright Status

    Stephen T. Tiffany owns the copyright for the QSU-BRIEF instrument and has granted CDISC permission to include this supplement in the CDISC inventory of QRS data standards supplements. Hence, CDISC developed QSTESTCD and QSTEST for each item based on the actual text on the instrument.

    These materials discuss and/or include the Questionnaire on Smoking Urges-Brief (QSU-BRIEF), which are owned exclusively by Stephen T. Tiffany. No part of the Questionnaire on Smoking Urges-Brief (QSU-BRIEF) may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of  Stephen T. Tiffany and payment of any applicable fees. Copyright Stephen T. Tiffany. All rights reserved.

    The CDISC documentation of this instrument consists of: (1) controlled terminology, (2) standard database structure with examples, and (3) CRF(s) annotated with the CDISC SDTMIG variables with submission values. 

    Info
    titleInformation for Reviewers

    Text in black is part of the template used to create this document and is not revised under CDISC internal or public review. Please review the blue text; this text represents the changes made to the template that are specific to this QRS instrument.

    Page properties
    Title

    Brief Questionnaire of Smoking Urges (QSU-BRIEF)

    CDISC ReferenceQuestionnaire Supplement to the Study Data Tabulation Model Implementation Guide for Human Clinical Trials
    QRS Short Name

    QSU-BRIEF

    QRS Permission StatusApproved
    TeamStandards team QRS instrument is being developed for (e.g., Major Depressive Disorder Standards Team), if applicable, and CDISC Questionnaires, Ratings, and Scales (QRS) Subteam
    Supplement Version1.0
    StatusDRAFT
    Date2023-12-30 (date current version released, regardless of status - this date should always match the date in the Revision History section below and should be updated every time this supplement is edited.)
    Notes to Readers
    • This supplement is available to be used with other CDISC user guides for specific therapeutic/disease areas and follows the CDISC Study Data Tabulation Model Implementation Guide for Human Clinical Trials.
    Known IssuesOnly include this row to describe any known issues related to the supplement. If there are no issues, this row can be deleted.

    Revision History

    ...

    © 2023 Clinical Data Interchange Standards Consortium, Inc. All rights reserved. 

    1 Introduction

    This document describes the CDISC implementation of the Brief Questionnaire of Smoking Urges instrument.

    For CRFs that are created by CDISC with SME input, use this statement:  There is no known standard case report form (CRF) available for this instrument. CDISC created this CRF to represent the instrument, which CDISC believes is in the public domain. This is not an endorsement of the instrument. The creation of this instrument was based on input from PASI (TA or instrument) subject matter experts. Sponsors may create this instrument’s CRF using their style guidelines, but they need to maintain the wording and order of the questions/items and responses as described on the CRF.  (note that if you use this statement, then QRS is not spelled out for the first time until where noted below.) (the related reference article needs to be included as a footnote on the CDISC created CRF)

    For CRFs that are created by CDISC based on articles, use this statement. Include the 1st sentence for articles that don't have a CRF.  If the 1st sentence is NOT included, then spell out "case report form (CRF)" in the 2nd sentence:  There is no known standard case report form (CRF) available for this instrument. CDISC created this CRF to represent the instrument, which CDISC believes is in the public domain. This is not an endorsement of the instrument. The creation of this instrument was based on published articles describing the instrument. Sponsors may create this instrument’s CRF using their style guidelines, but they need to maintain the wording and order of the questions/items and responses as described on the CRF.  (note that if you use this statement, then QRS is not spelled out for the first time until where noted below.)

    The representation of data collected for this instrument is based on the Study Data Tabulation Model Implementation Guide (SDTMIG) Questionnaires (QS) domain model, which can be found on the CDISC website at: https://www.cdisc.org/standards/foundational/sdtmig.

    The specific implementation details for this instrument are meant to be used in conjunction with the SDTMIG. All CDISC Questionnaires, Ratings, and Scales (QRS) documentation packages can be found on the CDISC website at: https://www.cdisc.org/standards/foundational/qrs.

    The CDISC Intellectual Property Policy can be found on the CDISC website at: https://www.cdisc.org/about/bylaws.

    1.1 Representations and Warranties, Limitations of Liability, and Disclaimers

    This document is a supplement to the SDTMIG for Human Clinical Trials and is covered under Appendix F of that document, which describes representations, warranties, limitations of liability, and disclaimers. Please see Appendix F of the SDTMIG for a complete version of this material.

    ...

    Although the United States Food and Drug Administration (US FDA) has provided input with regard to this supplement, this input does not constitute US FDA endorsement of any particular instrument.  (Include this line only for supplements that the US FDA will be reviewing.  Please DO NOT MODIFY the sentence.)

    2 Copyright Status

    Stephen T Tiffany owns the copyright for the QSU-BRIEF instrument and has granted CDISC permission to include this supplement in the CDISC inventory of QRS data standards supplements. (For supplements that are to be distributed by the copyright holder, add: Name of copyright holder (e.g., Board of Regents of The University of Texas System) will distribute the CDISC supplement package to sponsors when they are approved to use this instrument.) Hence, CDISC developed QSTESTCD and QSTEST for each item based on the actual text on the instrument.

    Questionnaire on Smoking Urges-Brief (QSU-BRIEF) (Cox, L. S., Tiffany, S. T., & Christen, A. G. (2001). Evaluation of the brief questionnaire of smoking urges (QSU-Brief) in laboratory and clinical settings. Nicotine and Tobacco Research, 3, 7-16). These materials discuss and/or include the Questionnaire on Smoking Urges-Brief (QSU-BRIEF), which are owned exclusively by Stephen T Tiffany. No part of the Questionnaire on Smoking Urges-Brief (QSU-BRIEF) may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of  Stephen T Tiffany and payment of any applicable fees. Copyright Stephen T Tiffany. All rights reserved.

    The CDISC documentation of this instrument consists of: (1) controlled terminology, (2) standard database structure with examples, and (3) CRF(s) annotated with the CDISC SDTMIG variables with submission values. 

    Info
    titleInformation for Reviewers

    The CRF is attached at the top of the Wiki. When you click the paperclip image, you will find the file for the annotated CRF.

    Note: CDISC Controlled Terminology is maintained by National Cancer Institute (NCI) Enterprise Vocabulary Services (EVS). The most recent version should be accessed through the CDISC website at: https://www.cdisc.org/standards/terminology/controlled-terminology.

    Info

    CDISC has developed this documentation at no cost to the copyright holder or any additional cost to users of the instrument beyond the normal license fees charged by the copyright holder.

    CDISC acknowledges Stephen T Tiffany for the approval to include the QSU-BRIEF in the CDISC data standards.

    References for the QSU-BRIEF:

    • Cox, L. S., Tiffany, S. T., and Christen, A. G. Evaluation of the brief questionnaire of smoking urges (QSU-BRIEF) in laboratory and clinical settings. Nicotine and Tobacco Research, 3:7-16, 2001.
    • Tiffany, S. T., and Drobes, D. J. The development and initial validation of a questionnaire on smoking urges. British Journal of Addition, 86:1467-1476, 1991.

    3 The QS Domain Model

    3.1 Assumptions for the QS Domain Model

    All assumptions and business rules described in the SDTMIG QS domain are applicable to this supplement. Additional assumptions specific to the QRS QSU-BRIEF are listed below.

    The QRS QSU-BRIEF is a self-report instrument used to assess the severity of craving to smoke.The QSU-Brief Form is intended to represent the two factors contained in the longer, 32-item QSU (Tiffany & Drobes, 1991). This brief form contains 10 items, each rated on a 100-point scale in increments of 10 ranging from 0 = "Strongly Disagree" to 100 = "Strongly Agree". Factor 1, which denotes a strong desire and inclination to smoke where smoking is perceived as rewarding for active smokers, is represented by the average score of items 1, 3, 6, 7, and 10. Factor 2, which denotes the anticipation of relief from the negative effects of smoking and the urgent desire to smoke, is represented by the average score of items 4, 8, and 9. The General Factor Scale presents a total urges score and is represented by the overall average score derived from all 10 items.

    ...

    The original scores include a numeric rating (0-100) in increments of 10, and a definition of what the ratings represent at the scale anchors (e.g., 0 = "Strongly Disagree" and 100 = "Strongly Agree"). For the QRS QSU-BRIEF, QSORRES is populated with the text description while the numeric rating is represented in the standardized character and numeric result variables QSSTRESC and QSSTRESN. 

    ...

    Numeric rating scales used within a questionnaire with a range of text and numeric values are indicated in the SUPPQS domain with:

    QNAM="QSANTXLO"     QNAM="QSANTXHI"

    ...

    1. For items with no data, QSORRES, QSSTRESC, and QSSTRESN are all missing and QSSTAT = "NOT DONE". If the reason is known then that reason is represented in QSREASND (e.g., QSREASND = "PREFER NOT TO ANSWER"). If the reason is unknown, then QSSTAT = "NOT DONE" and QSREASND is missing.

    2. Due to the variability of copyright holder and public domain derived subscore and overall score generation processes, records are not included for derived subscores or overall scores that are not provided.

    ...

    The CRF is attached at the top of the wiki. When you click the paperclip image, you will find the file for the annotated CRF.

    Note: CDISC Controlled Terminology is maintained by National Cancer Institute (NCI) Enterprise Vocabulary Services (EVS). The most recent version should be accessed through the CDISC website at: https://www.cdisc.org/standards/terminology/controlled-terminology.

    CDISC has developed this documentation at no cost to the copyright holder or any additional cost to users of the instrument beyond the normal license fees charged by the copyright holder.

    CDISC acknowledges Stephen T. Tiffany for the approval to include the QSU-BRIEF in the CDISC data standards.

    References for the QSU-BRIEF:

    • Cox, L. S., Tiffany, S. T., and Christen, A. G. Evaluation of the brief questionnaire of smoking urges (QSU-BRIEF) in laboratory and clinical settings. Nicotine and Tobacco Research, 3:7-16, 2001.

    3 The QS Domain Model

    3.1 Assumptions for the QS Domain Model

    All assumptions and business rules described in the SDTMIG QS domain are applicable to this supplement. Additional assumptions specific to the QSU-BRIEF are listed below.

    The QSU-BRIEF is a self-report instrument used to assess the severity of craving to smoke. The QSU-Brief Form contains 10 items and is intended to represent 2 factors and a general factor. The factor 1 scale is represented by the average score of items 1, 3, 6, 7, and 10; the factor 2 scale is represented by the average score of items 4, 8, and 9. The general factor scale is represented by the overall average score derived from all 10 items.

    1. The original scores include a numeric rating (0-100) in increments of 10, and a definition of what the ratings represent at the scale anchors (e.g., 0 = "Strongly Disagree" and 100 = "Strongly Agree"). For the QSU-BRIEF, QSORRES is populated with the text description; the numeric rating is represented in the standardized character and numeric result variables QSSTRESC and QSSTRESN.  All other numeric values are stored in QSORRES, QSSTRESC and QSSTRESN.

    2. The numeric rating scale used in the QSU-BRIEF includes text and numeric values as indicated in the SUPPQS domain with:

      QNAM = "QSANTXLO"     QNAM = "QSANTXHI"

      QNAM = "QSANVLLO"     QNAM = "QSANVLHI"
      By storing this information in SUPPQS, it is available for interpretation purposes.
    3. For questionnaire items QSTESTCD = "QSUB0101" to QSTESTCD ="QSUB0110", QSMETHOD is populated with "NUMERICAL RATING SCALE 11-POINT". The numeric rating scale represents the item-level ratings from 0 = "Strongly Disagree" to 100 = "Strongly Agree" in increments of 10.
    4. The time period of evaluation for the QSU-BRIEF is populated in the QSEVINTX field as an evaluation interval text value, since it cannot be precisely described as an ISO 8601 duration. The evaluation interval for the QSU-BRIEF is "RIGHT NOW" (QSEVINTX = "RIGHT NOW").
    5. Records are created in qs.xpt for every instrument item
      1. For items with no data, QSORRES, QSSTRESC, and QSSTRESN are all missing and QSSTAT = "NOT DONE". If the reason is known then that reason is represented in QSREASND (e.g., QSREASND = "PREFER NOT TO ANSWER"). If the reason is unknown, then QSSTAT = "NOT DONE" and QSREASND is missing.

      2. Due to the variability of copyright holder and public domain derived subscore and overall score generation processes, records are not included for derived subscores or overall scores that are not provided.
    6. The QSU-BRIEF instrument includes an overall score and 2 subscoresthat are considered as captured data on the instrument and is not considered as derived in the example below. These scores may be submitted in SDTM or derived in the Analysis Data Model (ADaM) per scoring instructions from Stephen T. Tiffany.

      1. Subscores and overall scores are represented in QSORRES, QSSTRESC, and QSSTRESN.
      2. If subscores or overall scores are received or derived by the sponsor, it is recommended that they are submitted to SDTM and verified in ADaM whenever feasible. It is the sponsor's responsibility to do this verification based on the instrument's user manual or instructions from the copyright owner.
    7. Terminology

      1. QSCAT, QSTESTCD, and QSTEST values are included in CDISC Controlled Terminology.

      2. A full list of value sets for the result fields is provided in Section 4, SDTM Mapping Strategy.

    3.2 Example for the QSU-BRIEF QS Domain Model

    The QSU-BRIEF example below shows the terminology used to implement the instrument in the QS domain. This example shows the data for 1 subject collected at the baseline visit and VISITNUM = 2 for the QSU-BRIEF instrument. The example uses CDISC Controlled Terminology for QSTESTCD, QSTEST, and QSCATAll original results, matching the CRF item response text, are represented in QSORRES. This result is then represented as a standard numeric score in QSSTRESN and as a standard character representation in QSSTRESC.

    The table represents the items from the QSU-BRIEF instrument.

    Dataset wrap
    Nameqs
    Rowcaps
    Rows 11-13:Row 11 represents the subscale score for Factor 1 Scale, row 12 represents subscale score for Factor 2 Scale, and row 13 represents the General Factor Scale. 
    Rows 14-26:

    Represent the missing data from the QSU-BRIEF Scale for subject 2324-P0001 at VISITNUM = 2. Since the visit was missed, the reason for not completing the questionnaire at the visit was not collected, and no date is assumed for when the visit would have occurred

    1. Subscores and overall scores are represented in--ORRES, --STRESC, and --STRESN.
    2. If subscores or overall scores are received or derived by the sponsor, it is recommended that they are submitted to SDTM and verified in ADaM whenever feasible. It is the sponsors repsonsibility to do this verification based on the instrument's user manual or instructions from the copyright owner.

    ...

    Terminology

    1. QSCAT, QSTESTCD, QSTEST, QSORRES, QSSTRESC, and QSSTRESN values are included in CDISC Controlled Terminology.

    2. A full list of value sets for the qualifier, timing, resultand unit fields is provided in Section 4, SDTM Mapping Strategy. (Note: Only the result field is always used. Include qualifier, timing, and unit fields as needed and remove this note.)

    3.2 Example for the QRS QSU-BRIEF QS Domain Model

    The QRS QSU-BRIEF example below shows the terminology used to implement the instrument in the QS domain. This example shows the data for 1 subject collected at the baseline visit for the QRS QSU-BRIEF instrument. The example uses CDISC Controlled Terminology for QSTESTCD, QSTEST, and QSCATAll original results, matching the CRF item response text, are represented in QSORRES. This result is then represented as a standard numeric score in QSSTRESN and as a standard character representation in QSSTRESC.

    ...

    Update the data in the table below to the current instrument. Include row descriptions as needed to highlight idiosyncrasies or items otherwise of note in this particular instrument. If only 1 or 2 row descriptions are needed, then the information should be included as a paragraph instead.

    For the not done visit that is now being included in all QRS supplements, when no reason is collected, information should be included, either in the paragraph before, or as a row description as follows:

    ...

    When the reason is collected for a not done visit, information or a row description should be added as follows:

    ...

    Info

    We are unable to make the example consistently show blue in the Wiki. All examples are updated for each QRS instrument, so we ask that you please review the example below.

    ...

    Dataset wrap
    Nameqs
    Rowcaps
    Rows 1-13:

    Represent the questions from the QSU-Brief Scale for subject 2324-P0001 at visit 1. Row 11 represents the subscale total score for Factor 1, row 12 represents subscale total score for Factor 2 and row 13 represents the Overall Global Score.

    Rows 15-16:Items 13 and 14 are presented for illustrative purposes only. When the instrument is conducted, only one will be represented based on the CRF instructions. In this example, Item 14 would not appear in the actual dataset and has result values of "XXX".
    Row 33:The total score does not have an evaluation interval value represented, since there is a mixture of evaluation interval values with items 13 and 14 that differ from the remaining items on the CRF

    .

    Dataset2
    RowSTUDYIDDOMAINUSUBJIDQSSEQQSTESTCDQSTESTQSCATQSORRESQSSTRESCQSSTRESNQSSTATQSREASNDQSMETHODQSLOBXFLVISITNUMQSDTCQSEVINTX

    1

    STUDYX

    QS

    2324-P0001

    1

    QSUB0101

    QSUB01-Desire Cigarette Right Now

    QSU-BRIEF

    90

    90

    90



    NUMERICAL RATING SCALE 11-POINT

    Y

    1

    2015-05-15

    DURING QUESTIONNAIRE COMPLETION

    RIGHT NOW

    2

    STUDYX

    QS

    2324-P0001

    2

    QSUB0102

    QSUB01-Nothing Better Than Cigarette Now

    QSU-BRIEF

    80
    50
    80
    50
    80

    NUMERICAL RATING SCALE 11-POINT
    50

    Y

    1

    2015-05-15

    DURING QUESTIONNAIRE COMPLETION

    RIGHT NOW

    3

    STUDYX

    QS

    2324-P0001

    3

    QSUB0103

    QSUB01-Probably Would Smoke Now

    QSU-BRIEF

    70

    70

    70



    NUMERICAL RATING SCALE 11-POINT

    Y

    1

    2015-05-15

    DURING QUESTIONNAIRE COMPLETION

    RIGHT NOW

    4

    STUDYX

    QS

    2324-P0001

    4

    QSUB0104

    QSUB01-Control Things Better Could Smoke

    QSU-BRIEF

    70

    70

    70

    7070



    NUMERICAL RATING SCALE 11-POINT

    Y

    1

    2015-05-15

    DURING QUESTIONNAIRE COMPLETION

    RIGHT NOW

    5

    STUDYX

    QS

    2324-P0001

    5

    QSUB0105

    QSUB01-All I Want Right Now Is Cigarette

    QSU-BRIEF

    50

    50

    50



    NUMERICAL RATING SCALE 11-POINT

    Y

    1

    2015-05-15

    DURING QUESTIONNAIRE COMPLETION

    RIGHT NOW

    6

    STUDYX

    QS

    2324-P0001

    6

    QSUB0106

    QSUB01-Have an Urge for a Cigarette

    QSU-BRIEF

    Strongly Agree

    100

    100



    NUMERICAL RATING SCALE 11-POINT

    Y

    1

    2015-05-15

    DURING QUESTIONNAIRE COMPLETION

    RIGHT NOW

    7

    STUDYX

    QS

    2324-P0001

    7

    QSUB0107

    QSUB01-A Cigarette Would Taste Good Now

    QSU-BRIEF

    80

    80

    80



    NUMERICAL RATING SCALE 11-POINT

    Y

    1

    2015-05-15

    DURING QUESTIONNAIRE COMPLETION

    RIGHT NOW

    8

    STUDYX

    QS

    2324-P0001

    8

    QSUB0108

    QSUB01-Do Anything for a Cigarette Now

    QSU-BRIEF

    90

    90

    90



    NUMERICAL RATING SCALE 11-POINT

    Y

    1

    2015-05-15

    DURING QUESTIONNAIRE COMPLETION

    RIGHT NOW

    9

    STUDYX

    QS

    2324-P0001

    9

    QSUB0109

    QSUB01-Smoking Make Me Less Depressed

    QSU-BRIEF

    80

    80

    80

    80



    NUMERICAL RATING SCALE 11-POINT

    Y

    1

    2015-05-15

    DURING QUESTIONNAIRE COMPLETION

    RIGHT NOW

    10

    STUDYX

    QS

    2324-P0001

    10

    QSUB0110

    QSUB01-Going Smoke as Soon as Possible

    QSU-BRIEF

    Strongly Disagree

    0

    0



    NUMERICAL RATING SCALE 11-POINT

    Y

    1

    2015-05-15

    DURING QUESTIONNAIRE COMPLETION

    RIGHT NOW

    11

    STUDYX

    QS

    2324-P0001

    11

    QSUB0111

    QSUB01-Factor 1 Scale

    QSU-BRIEF

    68

    68

    68




    Y

    1

    2015-05-15

    RIGHT NOW

    12

    STUDYX

    QS

    2324-P0001

    12

    QSUB0112

    QSUB01-Factor 2 Scale

    QSU-BRIEF

    80

    80

    80




    Y

    1

    2015-05-15

    RIGHT NOW

    13

    STUDYX

    QS

    2324-P0001

    13

    QSUB0113

    QSUB01-General Factor Scale

    QSU-BRIEF

    68

    71

    68

    71

    68Y12015-05-15Rows 11-32 removed for ease of use of template. (fyi, this row has merged cells so don't try to overwrite it when using the template; just delete it.)

    71




    Y

    1

    2015-05-15

    RIGHT NOW

    14

    65

    STUDYX

    QS

    2324-P0001

    1

    14

    QSUB0101

    QSUB01-Desire Cigarette Right Now

    QSU-BRIEF




    NOT DONE


    2

    2015-05-15DURING QUESTIONNAIRE COMPLETION
    Info

    The following is for illustrative purposes and would not really be included for the IDS-SR instrument in this template. It provides an example of what would need to be included if the instrument required supplemental qualifiers (see Section 5 Supplemental Qualifier Name Codes):

    Text that would remain unchanged has been left in black:

    The evaluation interval text value for data collection needs to be populated in SUPPQS as follows. The standard terminology for QNAM and QLABEL are listed below.

    Dataset wrap
    Namesuppqs
    STUDYIDRDOMAINUSUBJIDIDVARIDVARVALQNAMQLABELQVALQORIGSTUDYXQSP0001QSSEQSequence number corresponding to row of qs.xpt that supplemental qualifier is needed for (e.g., 8)Appropriate variable name to provide more information about data in qs.xpt, no more than 8 characters long (e.g., CONTACT).Label for QNAM (e.g., Contact Type)Value of QNAM variable ( e.g., SUBJECT VISIT)CRF

    4 SDTM Mapping Strategy

    This section is used for reference regarding the CRF data capture and to understand the alignment of the instrument to the SDTM QS domain. It also provides guidance on how the result variables (QSORRES, QSSTRESC, and QSSTRESN) should be populated.

    Info

    Include mappings for all sets of result values. For ease of use of this template, the complete set of response values for the example in Section 3.2 is not included.

    If the instrument has been entered into QRS Maker (all instruments should be), then the complete set of response values can be copied from QRS Maker and pasted into this supplement.

    Some example mappings are below.

    Info
    titleFor public domain instrument's published QRS responses
    • If this is a public domain instrument that has an individual item with published QRS responses, include the following sentence above the—TESTCDs listed with their responses.

      • The controlled response terminology for the tests below is named --TESTCDOR for the variable RSORRES and --TESTCDSTR for the variables RSSTRESN and RSSTTRESC.

    • If this is a public domain instrument with published QRS responses, include the following sentence above the—TESTCDs listed with their responses.
      • The controlled response terminology for the tests below is named --TESTCDTXXXOR for the variable RSORRES and --TESTCDTXXXTSTR for the variables RSSTRESN and RSSTTRESC.

    ...

    If all items have the same original result values, with the same standardized character and numeric values, then only include one table showing the values of QSORRES/QSSTRESC/QSSTRESN and put "All QSTESTCDs" (title case "All", and in quotes) above the table:

    "All QSTESTCDs"

    ...

    Similarly, if some, but not all, QSTESTCDs share the same original result and standardized values, then the QSTESTCD and corresponding QSTEST values are put in a list above the table rather than providing a separate table for each QSTESTCD/QSTEST.

    Info
    titleFor public domain instrument's published QRS responses

    If this is a public domain instrument with published QRS responses, include the following sentence above the—TESTCDs listed with their responses. This approach used the CDISC QRS CT instrument's SYNONYM as part of the codelist name.

    The controlled response terminology for the tests below is named SYNONYMSET1OR for the variable RSORRES and SYNONYMSET1STR for the variables RSSTRESN and RSSTTRESC.

    ...

    If there are responses that correspond to non-consecutive items or 1-7 consecutive items, include the test codes and test names above the table with the responses as follows:

    QSTESTCD = "test code 1" QSTEST = "test name 1"

    QSTESTCD = "test code 4" QSTEST = "test name 4"

    QSTESTCD = "test code 5" QSTEST = "test name 5"

    QSTESTCD = "test code 6" QSTEST = "test name 6"

    QSTESTCD = "test code 7" QSTEST = "test name 7"

    QSTESTCD = "test code 8" QSTEST = "test name 8"

    QSTESTCD = "test code 15" QSTEST = "test name 15"

    QSTESTCD = "test code 22" QSTEST = "test name 22"

    QSTESTCD = "test code 27" QSTEST = "test name 27"

    QSTESTCD = "test code 29" QSTEST = "test name 29"

    ...

    Info
    titleFor public domain instrument's published QRS responses

    If this is a public domain instrument with published QRS responses, include the following sentence above the—TESTCDs listed with their responses.

      • The controlled response terminology for the tests below is named --TESTCDTXXXOR for the variable RSORRES and --TESTCDTXXXTSTR for the variables RSSTRESN and RSSTTRESC.

    ...

    For responses that are for 8 or more consecutive items, an override label should be used in QRS Maker to show the items that are included as follows:

    QSTESTCD = "first test code in sequence" QSTEST = "first test name in sequence" through

    QSTESTCD = "last test code in sequence" QSTEST = "last test name in sequence"



    15

    STUDYX

    QS

    2324-P0001

    15

    QSUB0102

    QSUB01-Nothing Better Than Cigarette Now

    QSU-BRIEF




    NOT DONE




    2

    16

    STUDYX

    QS

    2324-P0001

    16

    QSUB0103

    QSUB01-Probably Would Smoke Now

    QSU-BRIEF




    NOT DONE


    2

    17

    STUDYX

    QS

    2324-P0001

    17

    QSUB0104

    QSUB01-Control Things Better Could Smoke

    QSU-BRIEF




    NOT DONE


    2

    18

    STUDYX

    QS

    2324-P0001

    18

    QSUB0105

    QSUB01-All I Want Right Now Is Cigarette

    QSU-BRIEF




    NOT DONE


    2

    19

    STUDYX

    QS

    2324-P0001

    19

    QSUB0106

    QSUB01-Have an Urge for a Cigarette

    QSU-BRIEF




    NOT DONE




    2

    20

    STUDYX

    QS

    2324-P0001

    20

    QSUB0107

    QSUB01-A Cigarette Would Taste Good Now

    QSU-BRIEF




    NOT DONE




    2

    21

    STUDYX

    QS

    2324-P0001

    21

    QSUB0108

    QSUB01-Do Anything for a Cigarette Now

    QSU-BRIEF




    NOT DONE




    2

    22

    STUDYX

    QS

    2324-P0001

    22

    QSUB0109

    QSUB01-Smoking Make Me Less Depressed

    QSU-BRIEF




    NOT DONE




    2

    23

    STUDYX

    QS

    2324-P0001

    23

    QSUB0110

    QSUB01-Going Smoke as Soon as Possible

    QSU-BRIEF




    NOT DONE


    2

    24

    STUDYX

    QS

    2324-P0001

    24

    QSUB0111

    QSUB01-Factor 1 Scale

    QSU-BRIEF




    NOT DONE


    2



    25

    STUDYX

    QS

    2324-P0001

    25

    QSUB0112

    QSUB01-Factor 2 Scale

    QSU-BRIEF




    NOT DONE


    2



    26

    STUDYX

    QS

    2324-P0001

    26

    QSUB0113

    QSUB01-General Factor Scale

    QSU-BRIEF




    NOT DONE


    2



    Dataset wrap
    Namesuppqs

    The anchor range text and numeric values for data collection needs to be populated in SUPPQS as follows. The example provided illustrates the potential response options for QSTESTCD = "QSUB0101" only, but this applies to all QSTESTCD. The standard terminology for QNAM and QLABEL are listed below.

    Dataset2
    tableidsuppqs
    STUDYIDRDOMAINUSUBJIDIDVARIDVARVALQNAMQLABELQVALQORIG
    STUDYXQS2324-P0001QSTESTCDQSUB0101QSANTXLOAnchor Text LowStrongly DisagreeCRF
    STUDYXQS2324-P0001QSTESTCDQSUB0101QSANTXHIAnchor Text HighStrongly AgreeCRF
    STUDYXQS2324-P0001QSTESTCDQSUB0101QSANVLLOAnchor Numeric Value Low0CRF
    STUDYXQS2324-P0001QSTESTCDQSUB0101QSANVLHIAnchor Numeric Value High100CRF

    4 SDTM Mapping Strategy

    This section is used for reference regarding the CRF data capture and to understand the alignment of the instrument to the SDTM QS domain. It also provides guidance on how the result variables (QSORRES, QSSTRESC, and QSSTRESN) should be populated.

    "All QSTESTCDs"

    QSORRESQSSTRESCQSSTRESN
    Strongly Disagree00
    101010
    202020
    303030
    404040
    505050
    606060
    707070
    808080
    909090
    Strongly Agree100100


    5 Supplemental Qualifier Name Codes

    ...

    5 Supplemental Qualifier Name Codes

    ...

    The instrument used as an example in this template did not require supplemental qualifiers, but this section has been included to provide guidance on those instruments which do require supplemental qualifiers. (Many instruments do not require it.) Text that always will be in the section when it is included has been left black.

    Additional rows will be required in the suppqs.xpt dataset for each supplemental qualifier needed.

    ...

    The following table contains additional standard name codes for use in the Supplement Qualifiers for Questionnaires (SUPPQS) special purpose dataset.

    Dataset wrap
    Namesuppqs
    Value of QNAM ( e.g., SUBJECT VISIT)
    QNAMQLABELQVALQLABELQVAL
    QSANTXLOAnchor Text LowStrongly Disagree
    QSANTXHIAnchor Text HighStrongly Agree
    QSANVLLOAnchor Numeric Value Low0
    QSANVLHIAnchor Numeric Value High100Appropriate variable name to provide more information about data in qs.xpt, no more than 8 characters long (e.g., CONTACT).Label for QNAM (e.g., Contact Type)


    End of Document