Page History

...

The QRS QSU-BRIEF is a multiple-choice instrument that clinicians may use to assess the severity of craving to smoke. It consists of 10 items, each rated on a 100-point scale in increments of 10 ranging from "strongly disagree" to "strongly agree". A mean score is computed for a two Factor Scales and a mean score computed for from five items represents Factor 1 and three items represent Factor 2. A overall mean score from all 10 items represents a General Factor Scale.

1. Include a description of an original score or other possible responses (You may need multiple numbered points for this, though the IDS-SR did not.). For original scores use the following language: The original scores include a numeric rating (0-100) in increments of 10 and a definition of what is represented by the rating (e.g., 0 = "Strongly Disagree" and 100 = "Strongly Agree"). For the QRS QSU-BRIEF, QSORRES is populated with the text description while the numeric rating is represented in the standardized character and numeric result variables QSSTRESC and QSSTRESN. (Replace this sentence for instruments with text only responses with “QSORRES and QSSTRESC are populated with the text description and QSSTRESN is not represented with a numeric value”.

2. Include a description of the evaluation interval if one exists. This may be numeric (QSEVLINT) or text (QSEVINTX). When the evaluation interval is provided in text and cannot be described in ISO 8601 format, use QSEVINTX instead of "QSEVLINT field in ISO 8601 format" and replace "the past 7 days" with the text (e.g., "DAYTIME'". Refer to SDTMIG Section 2.2.5 Timing Variables for All Classes). The evaluation interval needs to be clearly defined on the CRF. Remove this point if it does not apply.: 

   1. If numeric use this wording: The time period of evaluation for theQRS Short_Name is populated in the --EVLINTfield in ISO 8601 format when the evaluation interval can be precisely described as duration. The evaluation interval for the QRS Short_Name is the past 7 days (--EVLINT = "-P7D"). 

   2. If text use this wording: The time period of evaluation for the QRS Short_Name is populated in the --EVINTX field as an evaluation interval text value, since it cannot be precisely described as an ISO 8601 duration. The evaluation interval for the QRS Short_Name is "LIFETIME" (--EVINTX = "LIFETIME").
3. If there are subcategories, include a note that subcategories will be represented in QSSCAT. Also provide a list of the subcategories unless one is already provided in the description preceding the assumptions. Remove this point if it does not apply.  For example:  Items are divided into 5 subcategories represented in QSSCAT: "PHYSICAL WELL-BEING", "SOCIAL/FAMILY WELL-BEING", "EMOTIONAL WELL-BEING", "FUNCTIONAL WELL-BEING", and "ADDITIONAL CONCERNS".

4. Records are created in qs.xpt for every instrument item: 

   1. For items with no data, QSORRES, QSSTRESC, and QSSTRESN are all missing and QSSTAT = "NOT DONE". If the reason is known then that reason is represented in QSREASND (e.g., QSREASND = "PREFER NOT TO ANSWER"). If the reason is unknown, then QSSTAT = "NOT DONE" and QSREASND is missing.

   2. Due to the variability of copyright holder and public domain derived subscore and overall score generation processes, records are not included for derived subscores or overall scores that are not provided.

5. If the instrument standards currently being developed includes conditionally branched items, insert: Some items on the QRS Short_Name may be conditionally branched per the instrument instructions. Only one of the 2 oxygen saturation scales (RSTESTCD = "NEWS102" or "NEWS103") is completed for each subject. The other will be treated as a conditionally branched item. In addition, item RSTESTCD = "NEWS104A" is only completed when the response to RSTESTCD = "NEWS104" is the amount of oxygen received (in L/min). A record is created in rs.xpt for all items. When an item is considered a conditionally branched item, it is represented as follows:

   When assigned with conditionally branched responses are not documented in the instrument’s instructions or a user manual:

   1. QNAM = “QSCBRFL”, QLABEL = “Conditional Branched Item Flag“, QVAL = “Y” (this is a QS supplemental qualifier variable related to the record).
   2. QSORRES, QSSTRESC, and QSSTRESN are set to null (missing).

   When assigned conditionally branched responses are documented in instructions or a user manual:

   1. QNAM = “QSCBRFL”, QLABEL = “Conditional Branched Item Flag“, QVAL = “Y” (this is a QS supplemental qualifier variable).
   2. The QSORRES responses are represented as follows:
   1. For severity items, QSORRES = "None".
   2. For interference items, QSORRES = "Not at all".
   3. If numeric response values are assigned, they are represented here: QSSTRESC = 0 and QSSTRESN = 0.

      or if no numeric responses are assigned: QSSTRESC = NULL and QSSTRESN = NULL.

6. Include this point if overall score(s) are submitted to SDTM. Update blue text: The QRS Short_Name instrument includes an overall score (and subscores or other scores as needed.  If so, change "that is" to "that are") that is considered as captured data on the instrument and is not considered as derived in the example below. These scores may be submitted in SDTM or derived in the Analysis Data Model (ADaM) per scoring instructions from [Insert copyright holder's name or other source.].

   1. Subscores and overall scores are represented in--ORRES, --STRESC, and --STRESN.
   2. If subscores or overall scores are received or derived by the sponsor, it is recommended that they are submitted to SDTM and verified in ADaM whenever feasible. It is the sponsors repsonsibility to do this verification based on the instrument's user manual or instructions from the copyright owner.

7. Please review the decision on not including –EVAL and --EVALID in the QRS Supplement Best Practices topic “--EVAL/–EVALID not included in QRS domains/datasets”.Now we only represent administrative information if it is explicitly collected on an instrument. No assumptions are made for this data; if it's not on the instrument, it's not in the data.

   The SUPPQUAL variables used are a series of non-standard variables that represent collected administrator information, administration device, etc., and these updated SUPPQUAL variables are included in the WIKI non-standard variable registry (Non-standard Variable Registry). For example:

   1. PPRAID which is "Preprinted Administrator Identifier".
   2. COLAVL which is "Collected Administrator Value".

   The supplement version 1.0 of the FAS-NACC UDS V3.0 instrument shows an implementation example.

   The QRS Short_Name instrument collects administrative information as the preprinted examiner’s initials and the collected response. This is represented in the SUPPQUAL variable QNAM = --PPRAID” with QNAM = “Preprinted Administrator Identifier” and QVAL = “EXAMINER’S INITIALS”. The collected initials response is represented with QNAM = “--COLAID” and QNAM = “Collected Administrator Identifier” and QVAL = “ADM1”.

   This is part of the data example for the SUPPQUAL variables.

   The SUPPRS table represents the preprinted and collected administrative items represented on the CRF. 

    supprs.xpt

   STUDYID	RDOMAIN	USUBJID	IDVAR	IDVARVAL	QNAM	QLABEL	QVAL	QORIG
   STUDYX	RS	100-10001	RSCAT	FAS-NACC UDS V3.0	RSPPRAID	Preprinted Administrator Identifier	EXAMINER'S INITIALS	CRF
   STUDYX	RS	100-10001	RSCAT	FAS-NACC UDS V3.0	RSCOLAID	Collected Administrator Identifier	ADM1	CRF

8. Include this point if there are comments at the end of the instrument. Remove this point if it does not apply.: Comments located at the end of the QRS Short_Name will be recorded in the Comments domain (CO). All assumptions and business rules described in the SDTMIG CO domain are applicable.

9. Include this point if there are responses over 200 characters. Remove this point if it does not apply: Some responses to the QRS Short_Name items exceeded the 200-character limit for the QSORRES variable and needed to be reduced to fewer than 200 characters. Section 4, SDTM Mapping Strategy, indicates which item responses were revised in order to fit the 200-character limit.
   

10. Terminology

    1. QSCAT, QSTESTCD, QSTEST, QSORRES, QSSTRESC, and QSSTRESN (and other variables such as QSORRESU as needed; only include QSORRES, QSSTRESC, and QSSTRESN if the responses are published in CT with public domains instruments) values are included in CDISC Controlled Terminology.

    2. A full list of value sets for the qualifier, timing, result, and unit fields is provided in Section 4, SDTM Mapping Strategy. (Note: Only the result field is always used. Include qualifier, timing, and unit fields as needed and remove this note.)

...