Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Metadataspec
Shareqc_cdash4tig10_ds
PurposeEvents
Observation ClassDomainData Collection ScenarioImplementation OptionsOrder NumberCollection VariableCollection Variable LabelDRAFT Collection DefinitionQuestion TextPromptData TypeCollection CoreCase Report Form Completion InstructionsTabulation TargetMapping InstructionsControlled Terminology Codelist NameSubset Controlled Terminology/CDASH Codelist NameImplementation Notes
EventsDSPROTOCOL MILESTONE/OTHER EVENTN/A1STUDYIDStudy IdentifierA unique identifier for a study.What is the study identifier?[Protocol/Study]CharHRN/ASTUDYIDMaps directly to the tabulation variable listed in the Tabulation Target column.N/AN/AAlthough this field is not typically captured on a CRF, it should be displayed clearly on the CRF and/or in the EDC system. This field can be included in the database or populated during tabulation dataset creation.
EventsDSPROTOCOL MILESTONE/OTHER EVENTN/A2SITEIDStudy Site IdentifierA unique identifier for a site within a study.What is the site identifier?Site (Identifier)CharHRN/ADM.SITEIDMaps directly to the tabulation variable listed in the Tabulation Target column.N/AN/A

Paper: This is typically pre-printed in the header of each CRF page for single-site studies. For studies with multiple sites, this field may be left blank so that the number can be recorded by the site, or it may be pre-printed on the CRFs that are shipped to each site.

EDC: This should be prepopulated.

EventsDSPROTOCOL MILESTONE/OTHER EVENTN/A3SUBJIDSubject Identifier for the StudyA unique subject identifier within a site and a study.What [is/was] the (study) [subject/participant] identifier?[Subject/Participant] (Identifier)CharHRRecord the identifier for the subject.DM.SUBJIDMaps directly to the tabulation variable listed in the Tabulation Target column.N/AN/A

Paper: This is typically recorded in the header of each CRF page. EDC: The subject identifiers may be system-generated. This collection variable is typically collected in all domains. However, this collection variable is populated only in the tabulation DM domain.

EventsDSPROTOCOL MILESTONE/OTHER EVENTN/A4DSCATCategory for Disposition EventA categorization of the disposition events, which is used to distinguish between disposition events, protocol milestones, and other events.What was the category of the disposition?[Disposition Category]CharHRIf collected on the CRF, the applicant provides instructions to ensure the data is entered as intended.DSCATMaps directly to the tabulation variable listed in the Tabulation Target column.(DSCAT)N/AThis would most commonly be a heading on the CRF or screen, not a question to which the site would provide an answer. In this implementation scenario, DSCAT="PROTOCOL MILESTONE" or "OTHER EVENT".
EventsDSPROTOCOL MILESTONE/OTHER EVENTN/A5DSSCATSubcategory for Disposition EventA sub-division of the DSCAT values based on user-defined characteristics.What was the subcategory of the disposition?[Disposition Subcategory]; NULLCharOIf collected on the CRF, the applicant provides instructions to ensure the data is entered as intended.DSSCATMaps directly to the tabulation variable listed in the Tabulation Target column.N/AN/AApplicant-defined controlled terminology. This would most commonly be pre-printed on the CRF or screen and pre-populated in the data management system. This is not typically a question to which the site would provide an answer. DSSCAT can only be used if there is an DSCAT and it must be a subcategorization of the Protocol Milestone or Other Event.
EventsDSPROTOCOL MILESTONE/OTHER EVENTN/A6EPOCHEpochTrial Epoch (e.g., 'SCREENING', 'RUN-IN') for which subject disposition is being collected.What is the trial period for this disposition event?Trial PeriodCharR/CCheck the [epoch, or insert more appropriate wording] for which disposition event is being recorded.EPOCHMaps directly to the tabulation variable listed in the Tabulation Target column.(EPOCH)N/AIf protocol milestones or other events are collected more than once in the study, EPOCH may be needed to differentiate them. Typically, the trial epoch will be pre-printed on the CRF as part of the title of the page; however, some companies have a standard CRF module that includes a pick-list of epochs.
EventsDSPROTOCOL MILESTONE/OTHER EVENTN/A7

DSDECOD

Standardized Disposition Term

The standardized terminology of the disposition term.

[Applicant-defined][Applicant-defined]CharR/CIf collected on the CRF, the applicant provides instructions to ensure the data is entered as intended.DSDECODMaps directly to the tabulation variable listed in the Tabulation Target column. Both DSDECOD and DSTERM must be populated in the tabulation dataset.(PROTMLST);(OTHEVENT)N/A

Where DSCAT = "PROTOCOL MILESTONE", DSTERM contains the verbatim (as collected) and/or standardized text; DSDECOD uses the extensible controlled terminology codelist (PROTMLST). Where DSCAT="OTHER EVENT", DSDECOD uses the extensible controlled terminology codelist (OTHEVENT).

EventsDSPROTOCOL MILESTONE/OTHER EVENTN/A8DSTERMReported Term for the Disposition EventThe verbatim or pre-specified name of the disposition term.

[Applicant-defined]

[Applicant-defined]CharR/C

If collected on the CRF, the applicant provides instructions to ensure the data is entered as intended.




DSTERMMaps directly to the tabulation variable listed in the Tabulation Target column. The tabulation variables DSDECOD and DSTERM must be populated in the tabulation dataset.N/AN/A

When defining protocol milestones or other events, applicants may populate DSTERM and DSDECOD with the same value (e.g., INFORMED CONSENT OBTAINED). DSTERM may also be populated with a verbatim term, which is then standardized in DSDECOD.

EventsDSPROTOCOL MILESTONE/OTHER EVENTN/A9

DSSTDAT

Disposition Event Start DateThe date of the specified protocol milestone (e.g., informed consent) represented in an unambiguous date format (e.g., DD-MON-YYYY).What was the [protocol milestone/other event name] (start) date?[Protocol Milestone/Other Event Name] (start) DateCharR/CRecord the date of the protocol milestone/other event as defined in the protocol and/or CRF completion instructions, using this format (DD-MON-YYYY).DSSTDTCThis does not map directly to a tabulation variable. For the tabulation dataset, concatenate all collected START DATE and TIME components and populate the tabulation variable DSSTDTC in ISO 8601 format.N/AN/AApplicants should define in the protocol and/or CRF completion instructions the criteria for completion of each protocol milestone/other event and its associated (start) date.
EventsDSPROTOCOL MILESTONE/OTHER EVENTN/A10DSSTTIMDisposition Event Start TimeThe time of the specified protocol milestone (e.g., informed consent) or other event, represented in an unambiguous time format (e.g., hh:mm:ss).What was the [protocol milestone/other event name] (start) time?[Protocol Milestone/Other Event Name] (start) TimeCharORecord the time (as complete as possible) as defined in the protocol and/or CRF completion instructions.DSSTDTCThis does not map directly to a tabulation variable. For the tabulation dataset, concatenate all collected START DATE and TIME components and populate the tabulation variable DSSTDTC in ISO 8601 format.N/AN/AApplicants should define in the protocol and/or CRF completion instructions the criteria for completion of each protocol milestone/other event (start) time. Collecting the time of the event is only appropriate if it can be realistically determined and if there is a scientific reason for needing to know this level of detail.
EventsDSSTUDY PARTICIPATION DISPOSITION EVENTN/A1STUDYIDStudy IdentifierA unique identifier for a study.What is the study identifier?[Protocol/Study]CharHRN/ASTUDYIDMaps directly to the tabulation variable listed in the Tabulation Target column.N/AN/AAlthough this field is not typically captured on a CRF, it should be displayed clearly on the CRF and/or in the EDC system. This field can be included into the database or populated during tabulation dataset creation.
EventsDSSTUDY PARTICIPATION DISPOSITION EVENTN/A2SITEIDStudy Site IdentifierA unique identifier for a site within a study.What is the site identifier?Site (Identifier)CharHRN/ADM.SITEIDMaps directly to the tabulation variable listed in the Tabulation Target column.N/AN/A

Paper: This is typically pre-printed in the header of each CRF page for single-site studies. For studies with multiple sites, this field may be left blank so that the number can be recorded by the site, or it may be pre-printed on the CRFs that are shipped to each site.

EDC: This should be prepopulated.

EventsDSSTUDY PARTICIPATION DISPOSITION EVENTN/A3SUBJIDSubject Identifier for the StudyA unique subject identifier within a site and a study.What [is/was] the (study) [subject/participant] identifier?[Subject/Participant] (Identifier)CharHRRecord the identifier for the subject.DM.SUBJIDMaps directly to the tabulation variable listed in the Tabulation Target column.N/AN/A

Paper: This is typically recorded in the header of each CRF page. EDC: The subject identifiers may be system-generated. This collection variable is typically collected in all domains. However, this collection variable is populated only in the tabulation DM domain.

EventsDSSTUDY PARTICIPATION DISPOSITION EVENTN/A4DSCATCategory for Disposition EventA categorization of the disposition events which is used to distinguish between disposition events, protocol milestones, and other events.What was the category of the disposition?[Disposition Category]CharHRIf collected on the CRF, the applicant provides instructions to ensure the data is entered as intended.DSCATMaps directly to the tabulation variable listed in the Tabulation Target column.(DSCAT)N/AThis would most commonly be a heading on the CRF or screen, not a question to which the site would provide an answer. This is used to distinguish a DISPOSITION EVENT, a PROTOCOL MILESTONE, or an OTHER EVENT. In this implementation scenario, DSCAT="DISPOSITION EVENT"
EventsDSSTUDY PARTICIPATION DISPOSITION EVENTN/A5DSSCATSubcategory for Disposition EventA sub-division of the DSCAT values based on user-defined characteristics.What was the subcategory of the disposition?[Disposition Subcategory]; NULLCharOIf collected on the CRF, the applicant provides instructions to ensure the data is entered as intended.DSSCATMaps directly to the tabulation variable listed in the Tabulation Target column.N/AN/AApplicant-defined controlled terminology. This would most commonly be pre-printed on the CRF or screen and pre-populated in the data management system. This is not typically a question to which the site would provide an answer. DSSCAT can only be used if there is an DSCAT, and it must be a subcategorization of the Disposition event.
EventsDSSTUDY PARTICIPATION DISPOSITION EVENTN/A6EPOCHEpochTrial epoch (e.g., 'SCREENING', 'RUN-IN') for which subject disposition is being collected.What is the trial period for this disposition event?Trial PeriodCharR/CCheck the [epoch, or insert more appropriate wording] for which disposition is being recorded.EPOCHMaps directly to the tabulation variable listed in the Tabulation Target column.(EPOCH)N/AIf disposition events are collected more than once in the study, EPOCH may be needed to differentiate them. Typically, the trial epoch will be pre-printed on the CRF as part of the title of the page; however, some companies have a standard CRF module that includes a pick-list of epochs.
EventsDSSTUDY PARTICIPATION DISPOSITION EVENTN/A7DSDECODStandardized Disposition Term

The standardized terminology of the disposition term that describes whether a subject completed the study or a portion of a study (epoch), or the reason they did not complete.

What was the subject's status (at the EPOCH/study specific time frame)?Status (at the EPOCH/study specific time frame)CharR/CDocument the subject's status at [insert text corresponding to the selected trial epoch/study specific time frame]. If the subject discontinued prematurely, record the primary reason for discontinuation.DSDECODMaps directly to the tabulation variable listed in the Tabulation Target column. Both DSDECOD and DSTERM must be populated in the tabulation datasets. If DSTERM was collected as an "Other, Specify" free text, populate DSTERM with the free text and populate DSDECOD with the applicant-defined standardized text. If DSDECOD was collected with no free text, populate DSTERM and DSDECOD in the tabulation dataset with the DSDECOD value that was collected.(NCOMPLT)N/A

DSDECOD can be used as the standardized coded list with DSTERM used to capture any "Specify, Other" information, or DSDECOD can be used on its own. For applicant- and/or study-specific reasons for discontinuation, it is recommended that these reasons be pre-printed on the CRF, as subcategories of the appropriate standardized DSDECOD item. However, it is recommended to limit the use of applicant and study-specific reasons in order to promote consistent use of terminology and permit the combination of data across multiple applicants. Either DSTERM or DSDECOD must be on the CRF. Both may be used if DSTERM is used as a Specify, Other field.

EventsDSSTUDY PARTICIPATION DISPOSITION EVENTN/A8DSTERMReported Term for the Disposition EventThe verbatim or pre-specified name of the event. The reported or pre-specified name for how a subject completed the study or a portion of a study (epoch), or the reason they did not complete.What was the subject's status?; If [DSDECOD], specify[Status]; [Specify]CharR/CDocument the subject's status at [insert text corresponding to the selected trial epoch]. If the subject discontinued prematurely, record the primary reason for discontinuation. (Or, if used with a DECOD list) If Other is selected from the Status list, provide the verbatim reason.DSTERMMaps directly to the tabulation variable listed in the Tabulation Target column. The tabulation variables DSDECOD and DSTERM must be populated in the tabulation dataset. If DSTERM was collected as an "Other, Specify" free text, populate the tabulation variable DSTERM with the free text and populate DSDECOD with the applicant-defined standardized text. If DSDECOD was collected with no free text, populate DSTERM and DSDECOD in the tabulation dataset with the DSDECOD value that was collected.N/AN/AIf used with a DECOD list, free-text description of the subject's "Other" status. DSTERM is the verbatim term for subject status when Other is selected from the DSDECOD code list. This field would only be used with the prompt and completion instructions provided as a Specify, Other field in conjunction with DSDECOD. DSTERM may be used by itself when no code list is provided for DSDECOD on the CRF. Either DSTERM or DSDECOD must be on the CRF. DSTERM is required in the tabulation dataset.
EventsDSSTUDY PARTICIPATION DISPOSITION EVENTN/A9

DSSTDAT

Disposition Event Start DateThe date of the specified disposition event (e.g., study completion or discontinuation), represented in an unambiguous date format (e.g., DD-MON-YYYY).What was the disposition event date?Disposition Event DateCharR/CRecord the date of disposition event as defined in the protocol and/or CRF completion instructions using this format (DD-MON-YYYY)DSSTDTCThis does not map directly to an tabulation variable. For the tabulation dataset, concatenate all collected START DATE and TIME components and populate the tabulation variable DSSTDTC in ISO 8601 format.N/AN/A

Applicants should define in the protocol and/or CRF completion instructions the criteria for completion of each epoch for which a Disposition CRF will be provided. Define also the date of completion or discontinuation. Only collect the date of the disposition event once.

EventsDSSTUDY PARTICIPATION DISPOSITION EVENTN/A10DSSTTIMDisposition Event Start TimeThe time of the specified disposition event (e.g., study completion or discontinuation), represented in an unambiguous time format (e.g., hh:mm:ss).What was the disposition event time?Disposition Event TimeCharORecord the time (as complete as possible) that the subject completed the study or portion of the study as defined in the protocol and/or CRF completion instructions. If the subject did not complete the study or portion of the study, record the time (as complete as possible) as defined in the protocol and/or CRF completion instructions.DSSTDTCThis does not map directly to an tabulation variable. For the tabulation dataset, concatenate all collected START DATE and TIME components and populate the tabulation variable DSSTDTC in ISO 8601 format.N/AN/AApplicants should define in the protocol and/or CRF completion instructions the criteria for completion of each epoch for which a Disposition CRF will be provided. Define also the date of completion or discontinuation. Collecting the time of completion or discontinuation is only appropriate if it can be realistically determined and if there is a scientific reason for needing to know this level of detail. Typically, it is not recommended that a time be collected unless the subject is under the direct care of the site at the time of the event. Only collect the time of completion or discontinuation on the Disposition CRF module if the same information is not being collected on another CRF module.
EventsDSSTUDY PARTICIPATION DISPOSITION EVENTN/A11DTHDATDeath DateDate of death for any subject who died.What [is/was] the subject's date of death?Death DateCharORecord the date of deathDM.DTHDTCThis field does not map directly to an tabulation variable. For the tabulation dataset, concatenate all collected DATE and TIME components and populate the tabulation variable DTHDTC in ISO 8601 format.N/AN/AThe CDASH model defines Death Date as a timing variable; this is not included as a timing variable in the SDTM. It may be collected on any CRF deemed appropriate by the applicant, but should only be collected once. The tabulation variable DTHDTC is mapped to the DM domain during the tabulation dataset creation process. The tabulation variable DM.DTHFLG is not a collection variable, but is populated during the tabulation dataset creation process. Death Date may also be mapped to other tabulation domains (e.g., DS) as deemed appropriate by the applicant.
EventsDSSTUDY PARTICIPATION DISPOSITION EVENTN/A12DSCONTSubject ContinueThe plan for subject continuation to the next phase of the study or another study at the time of completion of the CRF.Will the subject continue?Subject ContinueCharORecord if the subject will be continuing to [the next phase of this study/related study] (applicant to specify as appropriate).SUPPDS.QVALThis information could be represented in a SUPPDS dataset as the value of SUPPDS.QVAL when SUPPDS.QNAM= "DSCONT" and SUPPDS.QLABEL="Subject Continue".(NY)N/AApplicants should specify the next phase of the study or the related study on the CRF. Typically this is a prompt to aid in monitoring and data cleaning, and usually not represented in a SUPPDS dataset.
EventsDSSTUDY PARTICIPATION DISPOSITION EVENTN/A13DSNEXTNext EPOCHIdentifies the study epoch or new study in which the subject will participate.What is the next [epoch/period/study/trial] the subject will [continue to/enter/enroll]?Next [Epoch/Period/Study/Trial]CharORecord the planned subsequent [study epoch/study] in which the subject intends to participate.N/AApplicant-defined tabulation mapping.N/AN/AApplicants should specify the next phase of the study or the related study on the CRF. The data are to be used to aid in monitoring and data cleaning. No specific tabulation dataset mapping rules are provided because the mapping depends on the situation (e.g., next epoch, next trial). Per applicant decision, plans to enter the next epoch within a study may be included in the tabulation datasets (e.g., SE). Actual subject entry into the next study is represented as part of Trial Design datasets of that study.