...

© 2022 Clinical Data Interchange Standards Consortium, Inc. All rights reserved. 

1 Introduction

This document describes the CDISC implementation of the Patient-Reported Outcomes Version of the Common Terminology Criteria for Adverse Events (PRO-CTCAE®) Item Library Version 1.0 (PRO-CTCAE V1.0) instrument.

...

The CDISC Intellectual Property Policy can be found on the CDISC website at: https://www.cdisc.org/about/bylaws.

1.1 Representations and Warranties, Limitations of Liability, and Disclaimers

This document is a supplement to the SDTMIG for Human Clinical Trials and is covered under Appendix F of that document, which describes representations, warranties, limitations of liability, and disclaimers. Please see Appendix F of the SDTMIG for a complete version of this material.

...

Although the United States Food and Drug Administration (US FDA) has provided input with regard to this supplement, this input does not constitute US FDA endorsement of any particular instrument. 

2 Copyright Status

The NATIONAL CANCER INSTITUTE (NCI) at the NATIONAL INSTITUTES OF HEALTH (NIH) owns the copyright for the PRO-CTCAE V1.0 instrument and has made it exempt from copyright restrictions. Use of the PRO-CTCAE V1.0 is subject to NCI terms of use policy listed on the website. CDISC has included this supplement in the CDISC inventory of QRS data standards supplements. Hence, CDISC developed QSTESTCD and QSTEST for each item based on the actual text on the instrument. 

...

• These materials discuss and/or include the Patient-Reported Outcomes Version of the Common Terminology Criteria for Adverse Events Item Library Version 1.0 Version Date 4/26/2020 (PRO-CTCAE V1.0) which is owned exclusively by the Division of Cancer Control and Population Sciences in the NATIONAL CANCER INSTITUTE at the NATIONAL INSTITUTES OF HEALTH (NCI). No part of the PRO-CTCAE V1.0 may be reproduced, distributed, or transmitted in any form or by any means, including photocopying recording, or other electronic or mechanical methods, without the prior written permission of NCI and payment of any applicable fees. PRO-CTCAE V1.0 copyright, NATIONAL CANCER INSTITUTE at the NATIONAL INSTITUTES OF HEALTH (NCI). All rights reserved.
• The PRO-CTCAE trademark items and information herein were developed by the Division of Cancer Control and Population Sciences in the NATIONAL CANCER INSTITUTE at the NATIONAL INSTITUTES OF HEALTH, in Bethesda, Maryland, U.S.A. Use of the PRO-CTCAE is subject to NCI's "Terms of Use". PRO-CTCAE Measurement System content should be downloaded using the "Instrument & Form Builder". https://healthcaredelivery.cancer.gov/prot-ctcae/. (Basch E, Reeve BB, Mitchell SA, Clauser SB, Minasian LM, Dueck AC, Mendoza TR, Hay J, Atkinson TM, Abernethy AP, Bruner DW, Cleeland CS, Sloan JA, Chilukuri R, Baumgartner P, Denicoff A, St Germain D, O'Mara AM, Chen A, Kelaghan J, Bennett AV, Sit L, Rogak L, Barz A, Paul DB, Schrag D. Development of the National Cancer Institute's patient-reported outcomes version of the common terminology criteria for adverse events (PRO-CTCAE). J Natl Cancer Inst 2014 Sept 29;106(9)).
• [1] National Institutes of Health – National Cancer Institute, Division of Cancer Control & Population Sciences. (2017, July 2) https://healthcaredelivery.cancer.gov/pro-ctcae/overview.html

3 The QS Domain Model

3.1 Assumptions for the QS Domain Model

All assumptions and business rules described in the SDTMIG QS domain are applicable to this supplement. Additional assumptions specific to the PRO-CTCAE V1.0 are listed below.

...

1. As a CDISC QRS standard, the instrument name is PRO-CTCAE V1.0, as provided in this supplement. As an item library, sponsors may select items from the overall library as a subset of items with the same CDISC Controlled Terminology as appropriate for the condition being studied. It is the users responsibility to identify the subset of items used from the overall PRO-CTCAE V1.0 Item Library (Version 1.0). The subsetted PRO-CTCAE V1.0 user's instrument should be titled "PRO-CTCAE sponsor-specified symptoms..." based on the sponsor's discretion when they identify the specific items being used. This will distinctly describe the subsetted instrument from the overall PRO-CTCAE V1.0.

2. For the PRO-CTCAE V1.0, QSORRES is populated with the text description while the numeric rating is represented in the standardized character and numeric result variables QSSTRESC and QSSTRESN. Please reference the PRO-CTCAE website FAQs for more details on the numeric responses. The responses for the PRO-CTCAE V1.0 are as follows:

   1. Depending on the symptomatic AE being measured, items assessing symptom presence/absence are rated as follows:
      1. Items rated on a binary response scale and rated from 0-1 (e.g., 0 = “No” and 1 = “Yes”);
      2. Items rated on multiple (more than two) response scale and rated from 0-1 (e.g., 0 = “No”, 1 = “Yes”, and “Not applicable” or "Not Applicable"); or
      3. Items rated on multiple (more than two) response scale and rated from 0-1 (e.g., 0 = “No”, 1 = “Yes”, “Not sexually active”, and “Prefer not to answer”).
   2. Items assessing symptom amount are rated on a 5-point scale and rated from 0-4 (e.g., 0 = “Not at all”, 1 = “A little bit”, 2 = “Somewhat”, 3 = “Quite a bit”, and 4 = “Very much”).
   3. Items assessing symptom frequency are rated on a 5-point scale and are rated from 0-4 (e.g., 0 = “Never”, 1 = “Rarely”, 2 = “Occasionally”, 3 = “Frequently”, and 4 = “Almost constantly”, "Not sexually
      active", and “Prefer not to answer”).
   4. Items assessing symptom severity are rated on a 5-point scale and are rated from 0-4 (e.g., 0 = “None”, 1 = “Mild”, 2 = “Moderate”, 3 = “Severe”, and 4 = “Very severe”, “Not applicable”, "Not sexually
      active", and “Prefer not to answer”).
   5. Items assessing symptom interference are rated on a 5-point scale and are rated from 0-4 (e.g., 0 = “Not at all”, 1 = “A little bit”, 2 = “Somewhat”, 3 = “Quite a bit”, and 4 = “Very much”).
3. The CRF represents up to 5 "other symptoms" to be recorded. In discussions with NIH, it was agreed to provide up to 10 "other symptoms" to be recorded if they existed. QSTESTCDs (QSTESTCDs "PT01082A" thru "PT0191A") and severity of the symptom at its worst (QSTESTCDs "PT01082B" thru "PT0191B").
4. Total scoring instructions have not yet been developed. Item-level scores are not combined (i.e., No total score nor symptom-specific scores are calculated.).
5. The time period of evaluation for the PRO-CTCAE V1.0 is populated in the QSEVLINT field in ISO 8601 format when the evaluation interval can be precisely described as duration. The evaluation interval for the PRO-CTCAE V1.0 is the past 7 days (QSEVLINT = "-P7D". Please reference the PRO-CTCAE website for more details on the evaluation interval.
6. Items are divided into 14 subcategories represented in the QSSCAT variable. These categorizations represent how the symptom terms are categorized in the PRO-CTCAE V1.0 Item Library (Version 1.0). See Section 4, SDTM Mapping Strategy, for a list of these subcategory values. 
   1. The symptomatic AE being measured by a given item (e.g., the Symptom Term represented on the CRF corresponding to a given item) is stored in the SUPPQS dataset with the QNAM = "QSSYMPTM". This matches the symptom term identified in the PRO-CTCAE V1.0 Item Library (Version 1.0).

7. Electronic conditional branching is recommended by NCI/NIH in the conduct of the PRO-CTCAE V1.0 for symptom terms that have two or more items. The logic branches from frequency, then to severity, then to interference. For example, if frequency is > (greater than) never, you next pose the severity question, and if severity>none, you pose the interference question. Please reference the PRO-CTCAE website for more details on the electronic conditional branching approach. In the conduct of the PRO-CTCAE V1.0 it expects responses for each item and there should be no missing responses. Electronic branched severity items are assigned responses of 0 = "None" and electronic branched interference items are assigned 0 = "Not al all".

8. The language in which the PRO-CTCAE V1.0 was administered (e.g., English, Spanish, Japanese) is collected with the Form Builder application and may be represented as a supplemental qualifier with QNAM = "QSDCLANG". Reference the PRO-CTCAE V1.0 website for a list of available language translations.
9. Terminology

   1. QSCAT, QSTESTCD, and QSTEST values are included in CDISC Controlled Terminology.

   2. A full list of value sets for the qualifier, and result fields is provided in Section 4, SDTM Mapping Strategy.

3.2 Example for the PRO-CTCAE V1.0 QS Domain Model

The PRO-CTCAE V1.0 example below shows the terminology used to implement the instrument in the QS domain. This example shows the data for 1 subject collected at the baseline visit for a PRO-CTCAE V1.0 instrument. The example uses CDISC Controlled Terminology for QSTESTCD, QSTEST, and QSCAT. All original results, matching the CRF item response text, are represented in QSORRES.This result is then represented as a standard numeric score in QSSTRESN and as a standard character representation in QSSTRESC.

...

4 SDTM Mapping Strategy

This section is used for reference regarding the CRF data capture and to understand the alignment of the instrument to the SDTM QS domain. It also provides guidance on how the result variables (QSORRES, QSSTRESC, and QSSTRESN) should be populated.

...

5 Supplemental Qualifier Name Codes

The following table contains additional standard name codes for use in the Supplement Qualifiers for Questionnaires (SUPPQS) special purpose dataset.

...